lkml.org 
[lkml]   [2020]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 6/6] PCI: uniphier: Add error message when failed to get phy
On Fri, Aug 7, 2020 at 4:25 AM Kunihiko Hayashi
<hayashi.kunihiko@socionext.com> wrote:
>
> Even if phy driver doesn't probe, the error message can't be distinguished
> from other errors. This displays error message caused by the phy driver
> explicitly.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
> drivers/pci/controller/dwc/pcie-uniphier.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
> index 93ef608..7c8721e 100644
> --- a/drivers/pci/controller/dwc/pcie-uniphier.c
> +++ b/drivers/pci/controller/dwc/pcie-uniphier.c
> @@ -489,8 +489,12 @@ static int uniphier_pcie_probe(struct platform_device *pdev)
> return PTR_ERR(priv->rst);
>
> priv->phy = devm_phy_optional_get(dev, "pcie-phy");

The point of the optional variant vs. devm_phy_get() is whether or not
you get an error message. So shouldn't you switch to devm_phy_get
instead?

> - if (IS_ERR(priv->phy))
> - return PTR_ERR(priv->phy);
> + if (IS_ERR(priv->phy)) {
> + ret = PTR_ERR(priv->phy);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "Failed to get phy (%d)\n", ret);
> + return ret;
> + }
>
> platform_set_drvdata(pdev, priv);
>
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2020-08-17 19:22    [W:0.244 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site