lkml.org 
[lkml]   [2020]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] PCI: designware-ep: Fix the Header Type check
On Fri, Aug 14, 2020 at 2:15 AM Zhiqiang Hou <Zhiqiang.Hou@nxp.com> wrote:
>
> From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
>
> The current check will result in the multiple function device
> fails to initialize. So fix the check by masking out the
> multiple function bit.
>
> Fixes: 0b24134f7888 ("PCI: dwc: Add validation that PCIe core is set to correct mode")
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> ---
> drivers/pci/controller/dwc/pcie-designware-ep.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> index 4680a51c49c0..4b7abfb1e669 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> @@ -654,7 +654,7 @@ int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep)
> int i;
>
> hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE);
> - if (hdr_type != PCI_HEADER_TYPE_NORMAL) {
> + if (hdr_type & 0x7f != PCI_HEADER_TYPE_NORMAL) {

Should have () around 'hdr_type & 0x7f'.

> dev_err(pci->dev,
> "PCIe controller is not set to EP mode (hdr_type:0x%x)!\n",
> hdr_type);

However, shouldn't the printed value be masked too? I'd just do:

hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE) & 0x7f;

Perhaps add a #define too. '0x7f' is used in several places.

Rob

\
 
 \ /
  Last update: 2020-08-14 17:52    [W:0.066 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site