Messages in this thread | | | Subject | Re: [PATCH v8 4/4] arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster | From | Sergei Shtylyov <> | Date | Wed, 12 Aug 2020 12:34:20 +0300 |
| |
Hello!
On 12.08.2020 10:19, Wesley Cheng wrote:
> Add the required DTS node for the USB VBUS output regulator, which is > available on PM8150B. This will provide the VBUS source to connected > peripherals. > > Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/pm8150b.dtsi | 6 ++++++ > arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 4 ++++ > 2 files changed, 10 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi > index 053c659734a7..9e560c1ca30d 100644 > --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi > @@ -53,6 +53,12 @@ power-on@800 { > status = "disabled"; > }; > > + pm8150b_vbus: dcdc@1100 {
s/dcdc/regulator/? What is "dcdc", anyway? The device nodes must have the generic names, according to the DT spec.
> + compatible = "qcom,pm8150b-vbus-reg"; > + status = "disabled"; > + reg = <0x1100>; > + }; > + > pm8150b_typec: typec@1500 { > compatible = "qcom,pm8150b-usb-typec"; > status = "disabled"; [...]
MBR, Sergei
| |