Messages in this thread | ![/](/images/icornerl.gif) | | Subject | Re: [PATCH] i2c: iproc: fix race between client unreg and isr | From | Ray Jui <> | Date | Mon, 27 Jul 2020 13:43:40 -0700 |
| |
On 7/27/2020 1:26 PM, Wolfram Sang wrote: > On Mon, Jul 27, 2020 at 08:13:46PM +0200, Wolfram Sang wrote: >> >>> Can you confirm that even if we have irq pending at the i2c IP core >>> level, as long as we execute Step 2. below (to disable/mask all slave >>> interrupts), after 'enable_irq' is called, we still will not receive any >>> further i2c slave interrupt? >> >> This is HW dependant. From my tests with Renesas HW, this is not the >> case. But the actual error case was impossible to trigger for me, so >> far. I might try again later. But even in the worst case, I would only >> get a "spurious interrupt" and not an NULL-ptr OOPS. > > Let me explain how I verified this: > > 0) add a debug print whenever the slave irq part is called > > 1) Put a 2 second delay after disable_irq() and before clearing > interrupt enable register > > 2) unbind the slave driver in the background, triggering the 2s delay > > 3) during the delay, try to read from the to-be-unbound slave in the > foreground > > 4) ensure there is no prinout from the slave irq > > Worked fine for me with the Renesas R-Car I2C IP interface. As mentioned > before, I couldn't trigger a bad case with my setup. So, I hope this new > fix will work for Rayagonda's test case, too! >
Sure. I suggest Dhananjay gives the sequence you proposed here a try (with delay added during the testing to widen the window to cover corner cases). If it works, we can just go with your proposed sequence here.
Thanks!
Ray
| ![\](/images/icornerr.gif) |