lkml.org 
[lkml]   [2020]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/3] dt-bindings: usb: ci-hdrc-usb2: add property disable-runtime-pm
Date
On Fri, 2020-07-10 at 12:56 -0300, Fabio Estevam wrote:
> Hi Philippe,
>
> On Fri, Jul 10, 2020 at 12:51 PM Philippe Schenker
> <philippe.schenker@toradex.com> wrote:
> > Chipidea depends on some hardware signals to be there in order
>
> I think this description is too vague.
>
> Could you please provide more details so that a user can know if their
> hardware falls into this category?
>
> It is not clear from seeing this series what is the hardware details
> that would require this property to be used.

Hi Fabio, Peter,

I tried to keep the description for this patch somewhat general. But as
Peter suggested I will add Toradex's use-case for this.

The problem with Colibri iMX6ULL is that we are stuck with a legacy
module standard that does only include one USB host/device switching
signal. Plus on that specific module we have no 5V available hence left
the connection of VBUS signal away.
This works normally pretty well but for our "dual-role OTG" port I could
not make it work with runtime-pm running and proper extcon
configuration. The problem was, when plugging in something in device or
host mode gets not enumerated and detected.

That are the reasons why I believe the PHY or something else in Chipidea
needs a signal that it does not have on that module that would wake the
whole thing from runtime-suspend.

I will think about a better description and send a v2

Thanks
Philippe
\
 
 \ /
  Last update: 2020-07-13 10:21    [W:0.080 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site