lkml.org 
[lkml]   [2020]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: ls1043a: update USB nodes status to match board config
On Tue, Jul 07, 2020 at 03:40:31PM +0800, Ran Wang wrote:
> ls1043a-rdb and ls1043a-qds board’s default HW config (such as
> pin mux selection) would not enable some USB controllers’
> data path, which causing over-current detected on those
> controllers. This will hit the case of ‘xhci driver prevent bus suspend
> if a root hub port detected over-current condition’, causing system
> failed to be suspended. So disable them in device tree to resolve this
> issue.
>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>

Applied, thanks.

\
 
 \ /
  Last update: 2020-07-13 09:11    [W:0.045 / U:0.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site