lkml.org 
[lkml]   [2020]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] xhci: Make debug message consistent with bus and port number
From
Date


> On May 7, 2020, at 18:35, Mathias Nyman <mathias.nyman@linux.intel.com> wrote:
>
> On 7.5.2020 11.21, Greg Kroah-Hartman wrote:
>> On Thu, May 07, 2020 at 03:58:36PM +0800, Kai-Heng Feng wrote:
>>>
>>>
>>>> On May 7, 2020, at 15:31, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>>>>
>>>> On Thu, May 07, 2020 at 03:15:01PM +0800, Kai-Heng Feng wrote:
>>>>>
>>>>>
>>>>>> On May 7, 2020, at 14:45, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>>>>>>
>>>>>> On Thu, May 07, 2020 at 02:17:55PM +0800, Kai-Heng Feng wrote:
>>>>>>> Current xhci debug message doesn't always output bus number, so it's
>>>>>>> hard to figure out it's from USB2 or USB3 root hub.
>>>>>>>
>>>>>>> In addition to that, some port numbers are offset to 0 and others are
>>>>>>> offset to 1. Use the latter to match the USB core.
>>>>>>>
>>>>>>> So use "bus number - port index + 1" to make debug message consistent.
>>>>>>>
>>>>>>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
>>>>>>> ---
>>>>>>> drivers/usb/host/xhci-hub.c | 41 +++++++++++++++++++++----------------
>>>>>>> 1 file changed, 23 insertions(+), 18 deletions(-)
>>>>>>>
>>>>>>> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
>>>>>>> index f37316d2c8fa..83088c262cc4 100644
>>>>>>> --- a/drivers/usb/host/xhci-hub.c
>>>>>>> +++ b/drivers/usb/host/xhci-hub.c
>>>>>>> @@ -1241,7 +1241,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>>>>>>> temp = readl(ports[wIndex]->addr);
>>>>>>> /* Disable port */
>>>>>>> if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
>>>>>>> - xhci_dbg(xhci, "Disable port %d\n", wIndex);
>>>>>>> + xhci_dbg(xhci, "Disable port %d-%d\n",
>>>>>>> + hcd->self.busnum, wIndex + 1);
>>>>>>
>>>>>> Shouldn't xhci_dbg() show the bus number already?
>>>>>
>>>>> It's the PCI bus number, different to USB2/USB3 root hub bus number...
>>>>
>>>> But if this is using dev_dbg(), and it is, then you know how to look
>>>> that up by seeing where that device is in sysfs at that point in time.
>>>>
>>>> So why add this again?
>>>
>>> xHCI has two HCD, one for USB2 and one for USB3.
>>> If both of their port with same number are in use, for instance, port 1, then they are port 1-1 and port 2-1.
>>> Right now the debug message only show "Port 1", we still can't find the corresponding port via sysfs with insufficient info.
>>
>> Look at the full kernel log line, the xhci hcd device should be showing
>> you unique information. If not, something else is wrong.
>>
>
> What Kai-Heng suggest here makes sense, and is useful.
> We use similar style debugging in other places, and it is helpful as it matches
> usb core debugging style.
>
> This might seem odd but reason is that the xHC controller is one device which
> doesn't really separate USB2 and USB3.
> All ports are for example in one long array.
>
> On the xhci driver side things look very different. We register two HCD's,
> one for usb 2 and one for USB 3. In many cases the debugging is not tied to a HCD
> in any way, (starting, stopping controller, command completion interrupts etc),
> other cases the debugging is very much tied to a specific hcd,
> for example when we are handling a port requsts for the roothub.

A gentle ping...

>
> Thanks
> -Mathias

\
 
 \ /
  Last update: 2020-06-08 05:59    [W:0.054 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site