lkml.org 
[lkml]   [2020]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] ARM: dts: Change WDOG_ANY signal from push-pull to open-drain
On Thu, May 28, 2020 at 02:43:43PM +0000, Schrempf Frieder wrote:
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
>
> The WDOG_ANY signal is connected to the RESET_IN signal of the SoM
> and baseboard. It is currently configured as push-pull, which means
> that if some external device like a programmer wants to assert the
> RESET_IN signal by pulling it to ground, it drives against the high
> level WDOG_ANY output of the SoC.
>
> To fix this we set the WDOG_ANY signal to open-drain configuration.
> That way we make sure that the RESET_IN can be asserted by the
> watchdog as well as by external devices.
>
> Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
> Cc: stable@vger.kernel.org
> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>

Added 'imx6ul-kontron:' to subject and applied both patches.

Shawn

\
 
 \ /
  Last update: 2020-06-23 05:41    [W:0.037 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site