lkml.org 
[lkml]   [2020]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] usb: gadget: u_serial: improve performance for large data
Date
If the hardware (like DMA engine) could support large usb request exceeds
maximum packet size, use larger buffer when performing Rx/Tx could reduce
request numbers and improve performance.

Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
---
drivers/usb/gadget/function/u_serial.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 3cfc6e2..cdcc070 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -80,6 +80,8 @@
#define QUEUE_SIZE 16
#define WRITE_BUF_SIZE 8192 /* TX only */
#define GS_CONSOLE_BUF_SIZE 8192
+/* for hardware can do more than max packet */
+#define REQ_BUF_SIZE 4096

/* console info */
struct gs_console {
@@ -247,7 +249,8 @@ static int gs_start_tx(struct gs_port *port)
break;

req = list_entry(pool->next, struct usb_request, list);
- len = gs_send_packet(port, req->buf, in->maxpacket);
+ len = gs_send_packet(port, req->buf, in->can_exceed_maxp ?
+ REQ_BUF_SIZE : in->maxpacket);
if (len == 0) {
wake_up_interruptible(&port->drain_wait);
break;
@@ -514,7 +517,9 @@ static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
* be as speedy as we might otherwise be.
*/
for (i = 0; i < n; i++) {
- req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
+ req = gs_alloc_req(ep, ep->can_exceed_maxp ?
+ REQ_BUF_SIZE : ep->maxpacket,
+ GFP_ATOMIC);
if (!req)
return list_empty(head) ? -ENOMEM : 0;
req->complete = fn;
--
1.7.9.5
\
 
 \ /
  Last update: 2020-06-16 14:36    [W:0.094 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site