Messages in this thread Patch in this message | | | From | Suman Anna <> | Subject | [PATCH v3 3/6] dt-bindings: remoteproc: Add common TI SCI rproc bindings | Date | Fri, 12 Jun 2020 17:49:11 -0500 |
| |
Add a bindings document that lists the common TI SCI properties used by the K3 R5F and DSP remoteproc devices.
Signed-off-by: Suman Anna <s-anna@ti.com> --- v3: New Patch refactoring out the common ti-sci-proc properties
.../bindings/remoteproc/ti,k3-sci-proc.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-sci-proc.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-sci-proc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-sci-proc.yaml new file mode 100644 index 000000000000..883b6e9b5282 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-sci-proc.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/ti,k3-sci-proc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common TI K3 remote processor device bindings + +maintainers: + - Suman Anna <s-anna@ti.com> + +description: | + The TI K3 family of SoCs usually have one or more remote processor sub-systems + like the dual-core R5F sub-system or a C66x or C71x DSP processor subsystem. + The device management of these remote processors is managed by a dedicated + System Processor, and the communication with that processor is managed through + the TI-SCI protocol. + + Each remote processor device node should define a common set of properties + that allows the System Processor firmware to perform the device management + such as powering the IPs, asserting/deasserting the resets for each of these + processors. + +properties: + ti,sci: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Should be a phandle to the TI-SCI System Controller node + + ti,sci-dev-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Should contain the TI-SCI device id corresponding to the remote processor + core. Please refer to the corresponding System Controller documentation + for valid values. + + ti,sci-proc-ids: + description: Should contain a single tuple of <proc_id host_id>. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - maxItems: 1 + items: + items: + - description: TI-SCI processor id for the remote processor device + - description: TI-SCI host id to which processor control + ownership should be transferred to + +required: + - ti,sci + - ti,sci-dev-id + - ti,sci-proc-ids -- 2.26.0
| |