lkml.org 
[lkml]   [2020]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC,net-next, 0/5] Strict mode for VRF
From
Date
Thanks for doing this Andrea. This is a very important patch. I'll let 
the others comment on the specificity of the patch, but strict mode=1
should be the default .

Dinesh

On 6/12/20 9:49 AM, Andrea Mayer wrote:
> This patch set adds the new "strict mode" functionality to the Virtual
> Routing and Forwarding infrastructure (VRF). Hereafter we discuss the
> requirements and the main features of the "strict mode" for VRF.
>
> On VRF creation, it is necessary to specify the associated routing table used
> during the lookup operations. Currently, there is no mechanism that avoids
> creating multiple VRFs sharing the same routing table. In other words, it is not
> possible to force a one-to-one relationship between a specific VRF and the table
> associated with it.
>
>
> The "strict mode" imposes that each VRF can be associated to a routing table
> only if such routing table is not already in use by any other VRF.
> In particular, the strict mode ensures that:
>
> 1) given a specific routing table, the VRF (if exists) is uniquely identified;
> 2) given a specific VRF, the related table is not shared with any other VRF.
>
> Constraints (1) and (2) force a one-to-one relationship between each VRF and the
> corresponding routing table.
>
>
> The strict mode feature is designed to be network-namespace aware and it can be
> directly enabled/disabled acting on the "strict_mode" parameter.
> Read and write operations are carried out through the classic sysctl command on
> net.vrf.strict_mode path, i.e: sysctl -w net.vrf.strict_mode=1.
>
> Only two distinct values {0,1} are accepted by the strict_mode parameter:
>
> - with strict_mode=0, multiple VRFs can be associated with the same table.
> This is the (legacy) default kernel behavior, the same that we experience
> when the strict mode patch set is not applied;
>
> - with strict_mode=1, the one-to-one relationship between the VRFs and the
> associated tables is guaranteed. In this configuration, the creation of a VRF
> which refers to a routing table already associated with another VRF fails and
> the error is returned to the user.
>
>
> The kernel keeps track of the associations between a VRF and the routing table
> during the VRF setup, in the "management" plane. Therefore, the strict mode does
> not impact the performance or intrinsic functionality of the data plane in any
> way.
>
> When the strict mode is active it is always possible to disable the strict mode,
> while the reverse operation is not always allowed.
> Setting the strict_mode parameter to 0 is equivalent to removing the one-to-one
> constraint between any single VRF and its associated routing table.
>
> Conversely, if the strict mode is disabled and there are multiple VRFs that
> refer to the same routing table, then it is prohibited to set the strict_mode
> parameter to 1. In this configuration, any attempt to perform the operation will
> lead to an error and it will be reported to the user.
> To enable strict mode once again (by setting the strict_mode parameter to 1),
> you must first remove all the VRFs that share common tables.
>
> There are several use cases which can take advantage from the introduction of
> the strict mode feature. In particular, the strict mode allows us to:
>
> i) guarantee the proper functioning of some applications which deal with
> routing protocols;
>
> ii) perform some tunneling decap operations which require to use specific
> routing tables for segregating and forwarding the traffic.
>
>
> Considering (i), the creation of different VRFs that point to the same table
> leads to the situation where two different routing entities believe they have
> exclusive access to the same table. This leads to the situation where different
> routing daemons can conflict for gaining routes control due to overlapping
> tables. By enabling strict mode it is possible to prevent this situation which
> often occurs due to incorrect configurations done by the users.
> The ability to enable/disable the strict mode functionality does not depend on
> the tool used for configuring the networking. In essence, the strict mode patch
> solves, at the kernel level, what some other patches [1] had tried to solve at
> the userspace level (using only iproute2) with all the related problems.
>
> Considering (ii), the introduction of the strict mode functionality allows us
> implementing the SRv6 End.DT4 behavior. Such behavior terminates a SR tunnel and
> it forwards the IPv4 traffic according to the routes present in the routing
> table supplied during the configuration. The SRv6 End.DT4 can be realized
> exploiting the routing capabilities made available by the VRF infrastructure.
> This behavior could leverage a specific VRF for forcing the traffic to be
> forwarded in accordance with the routes available in the VRF table.
> Anyway, in order to make the End.DT4 properly work, it must be guaranteed that
> the table used for the route lookup operations is bound to one and only one VRF.
> In this way, it is possible to use the table for uniquely retrieving the
> associated VRF and for routing packets.
>
> I would like to thank David Ahern for his constant and valuable support during
> the design and development phases of this patch set.
>
> Comments, suggestions and improvements are very welcome!
>
> Thanks,
> Andrea Mayer
>
>
> [1] https://lore.kernel.org/netdev/20200307205916.15646-1-sharpd@cumulusnetworks.com/
>
> Andrea Mayer (5):
> l3mdev: add infrastructure for table to VRF mapping
> vrf: track associations between VRF devices and tables
> vrf: add sysctl parameter for strict mode
> vrf: add l3mdev registration for table to VRF device lookup
> selftests: add selftest for the VRF strict mode
>
> drivers/net/vrf.c | 450 +++++++++++++++++-
> include/net/l3mdev.h | 37 ++
> net/l3mdev/l3mdev.c | 95 ++++
> .../selftests/net/vrf_strict_mode_test.sh | 390 +++++++++++++++
> 4 files changed, 963 insertions(+), 9 deletions(-)
> create mode 100755 tools/testing/selftests/net/vrf_strict_mode_test.sh
>

\
 
 \ /
  Last update: 2020-06-12 19:06    [W:0.084 / U:1.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site