lkml.org 
[lkml]   [2020]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 06/10] drivers: qcom: rpmh-rsc: A lot of comments
From
Date
Hi,

Reviewed-by: Maulik Shah <mkshah@codeaurora.org>

Thanks,
Maulik

On 4/8/2020 5:20 AM, Douglas Anderson wrote:
> I've been pouring through the rpmh-rsc code and trying to understand
> it. Document everything to the best of my ability. All documentation
> here is strictly from code analysis--no actual knowledge of the
> hardware was used. If something is wrong in here I either
> misunderstood the code, had a typo, or the code has a bug in it
> leading to my incorrect understanding.
>
> In a few places here I have documented things that don't make tons of
> sense. A future patch will try to address this. While this means I'm
> adding comments / todos and then later fixing them in the series, it
> seemed more urgent to get things documented first so that people could
> understand the later patches.
>
> Any comments I adjusted I also tried to make match kernel-doc better.
> Specifically:
> - kernel-doc says do not leave a blank line between the function
> description and the arguments
> - kernel-doc examples always have things starting w/ a capital and
> ending with a period.
>
> This should be a no-op. It's just comment changes.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
>
> Changes in v3:
> - Adjusted comments for rpmh_rsc_write_ctrl_data().
> - Comments for new enable_tcs_irq() function.
> - Comments for new rpmh_rsc_cpu_pm_callback() function.
> - Mention in message that I also fixed up kernel-doc stuff.
> - Moved comments patch after ("Kill cmd_cache and find_match...").
> - One space after a period now (Maulik).
> - Plural of TCS fixed to TCSes following Maulik's example.
> - Re-added comment in tcs_write() about checking for same address.
> - Rebased atop v16 ('Invoke rpmh_flush...') series.
> - __tcs_set_trigger() comments adjusted now that it can set or unset.
> - get_tcs_for_msg() documents why it's safe to borrow the wake TCS.
> - get_tcs_for_msg() no longer returns -EAGAIN.
>
> Changes in v2:
> - Document bug of tcs_write() not handling -EAGAIN.
> - Document get_tcs_for_msg() => -EAGAIN only for ACTIVE_ONLY.
> - Document locks for updating "tcs_in_use" more.
> - Document tcs_is_free() without drv->lock OK for tcs_invalidate().
> - Document that rpmh_rsc_send_data() can be an implicit invalidate.
> - Document two get_tcs_for_msg() issues if zero-active TCS.
> - Fixed documentation of "tcs" param in find_slots().
> - More clear that active-only xfers can happen on wake TCS sometimes.
> - Reword tcs_write() doc a bit.
>
> drivers/soc/qcom/rpmh-internal.h | 62 ++++++---
> drivers/soc/qcom/rpmh-rsc.c | 221 ++++++++++++++++++++++++++++---
> 2 files changed, 246 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
> index 6a6d776ccca9..f06350cbc9a2 100644
> --- a/drivers/soc/qcom/rpmh-internal.h
> +++ b/drivers/soc/qcom/rpmh-internal.h
> @@ -22,15 +22,24 @@ struct rsc_drv;
> * struct tcs_group: group of Trigger Command Sets (TCS) to send state requests
> * to the controller
> *
> - * @drv: the controller
> - * @type: type of the TCS in this group - active, sleep, wake
> - * @mask: mask of the TCSes relative to all the TCSes in the RSC
> - * @offset: start of the TCS group relative to the TCSes in the RSC
> - * @num_tcs: number of TCSes in this type
> - * @ncpt: number of commands in each TCS
> - * @lock: lock for synchronizing this TCS writes
> - * @req: requests that are sent from the TCS
> - * @slots: indicates which of @cmd_addr are occupied
> + * @drv: The controller.
> + * @type: Type of the TCS in this group - active, sleep, wake.
> + * @mask: Mask of the TCSes relative to all the TCSes in the RSC.
> + * @offset: Start of the TCS group relative to the TCSes in the RSC.
> + * @num_tcs: Number of TCSes in this type.
> + * @ncpt: Number of commands in each TCS.
> + * @lock: Lock for synchronizing this TCS writes.
> + * @req: Requests that are sent from the TCS; only used for ACTIVE_ONLY
> + * transfers (could be on a wake/sleep TCS if we are borrowing for
> + * an ACTIVE_ONLY transfer).
> + * Start: grab drv->lock, set req, set tcs_in_use, drop drv->lock,
> + * trigger
> + * End: get irq, access req,
> + * grab drv->lock, clear tcs_in_use, drop drv->lock
> + * @slots: Indicates which of @cmd_addr are occupied; only used for
> + * SLEEP / WAKE TCSs. Things are tightly packed in the
> + * case that (ncpt < MAX_CMDS_PER_TCS). That is if ncpt = 2 and
> + * MAX_CMDS_PER_TCS = 16 then bit[2] = the first bit in 2nd TCS.
> */
> struct tcs_group {
> struct rsc_drv *drv;
> @@ -82,19 +91,28 @@ struct rpmh_ctrlr {
> * struct rsc_drv: the Direct Resource Voter (DRV) of the
> * Resource State Coordinator controller (RSC)
> *
> - * @name: Controller identifier
> - * @tcs_base: Start address of the TCS registers in this controller
> - * @id: Instance id in the controller (Direct Resource Voter)
> - * @num_tcs: Number of TCSes in this DRV
> - * @rsc_pm: CPU PM notifier for controller
> - * Used when solver mode is not present
> - * @cpus_entered_pm: CPU mask for cpus in idle power collapse
> - * Used when solver mode is not present
> - * @tcs: TCS groups
> - * @tcs_in_use: S/W state of the TCS
> - * @lock: Synchronize state of the controller
> - * @pm_lock: Synchronize during PM notifications
> - * Used when solver mode is not present
> + * @name: Controller identifier.
> + * @tcs_base: Start address of the TCS registers in this controller.
> + * @id: Instance id in the controller (Direct Resource Voter).
> + * @num_tcs: Number of TCSes in this DRV.
> + * @rsc_pm: CPU PM notifier for controller.
> + * Used when solver mode is not present.
> + * @cpus_entered_pm: CPU mask for cpus in idle power collapse.
> + * Used when solver mode is not present.
> + * @tcs: TCS groups.
> + * @tcs_in_use: S/W state of the TCS; only set for ACTIVE_ONLY
> + * transfers, but might show a sleep/wake TCS in use if
> + * it was borrowed for an active_only transfer. You
> + * must hold both the lock in this struct and the
> + * tcs_lock for the TCS in order to mark a TCS as
> + * in-use, but you only need the lock in this structure
> + * (aka the drv->lock) to mark one freed.
> + * @lock: Synchronize state of the controller. If you will be
> + * grabbing this lock and a tcs_lock at the same time,
> + * grab the tcs_lock first so we always have a
> + * consistent lock ordering.
> + * @pm_lock: Synchronize during PM notifications.
> + * Used when solver mode is not present.
> * @client: Handle to the DRV's client.
> */
> struct rsc_drv {
> diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
> index da1045c92b38..84ae3e514eee 100644
> --- a/drivers/soc/qcom/rpmh-rsc.c
> +++ b/drivers/soc/qcom/rpmh-rsc.c
> @@ -171,12 +171,38 @@ static void write_tcs_reg_sync(struct rsc_drv *drv, int reg, int tcs_id,
> }
> }
>
> +/**
> + * tcs_is_free() - Return if a TCS is totally free.
> + * @drv: The RSC controller.
> + * @tcs_id: The global ID of this TCS.
> + *
> + * Returns true if nobody has claimed this TCS (by setting tcs_in_use).
> + * If the TCS looks free, checks that the hardware agrees.
> + *
> + * Must be called with the drv->lock held or the tcs_lock for the TCS being
> + * tested. If only the tcs_lock is held then it is possible that this
> + * function will return that a tcs is still busy when it has been recently
> + * been freed but it will never return free when a TCS is actually in use.
> + *
> + * Return: true if the given TCS is free.
> + */
> static bool tcs_is_free(struct rsc_drv *drv, int tcs_id)
> {
> return !test_bit(tcs_id, drv->tcs_in_use) &&
> read_tcs_reg(drv, RSC_DRV_STATUS, tcs_id);
> }
>
> +/**
> + * tcs_invalidate() - Invalidate all TCSes of the given type (sleep or wake).
> + * @drv: The RSC controller.
> + * @type: SLEEP_TCS or WAKE_TCS
> + *
> + * This will clear the "slots" variable of the given tcs_group and also
> + * tell the hardware to forget about all entries.
> + *
> + * Return: 0 if no problem, or -EAGAIN if the caller should try again in a
> + * bit. Caller should make sure to enable interrupts between tries.
> + */
> static int tcs_invalidate(struct rsc_drv *drv, int type)
> {
> int m;
> @@ -203,9 +229,11 @@ static int tcs_invalidate(struct rsc_drv *drv, int type)
> }
>
> /**
> - * rpmh_rsc_invalidate - Invalidate sleep and wake TCSes
> + * rpmh_rsc_invalidate() - Invalidate sleep and wake TCSes.
> + * @drv: The RSC controller.
> *
> - * @drv: the RSC controller
> + * Return: 0 if no problem, or -EAGAIN if the caller should try again in a
> + * bit. Caller should make sure to enable interrupts between tries.
> */
> int rpmh_rsc_invalidate(struct rsc_drv *drv)
> {
> @@ -218,6 +246,18 @@ int rpmh_rsc_invalidate(struct rsc_drv *drv)
> return ret;
> }
>
> +/**
> + * get_tcs_for_msg() - Get the tcs_group used to send the given message.
> + * @drv: The RSC controller.
> + * @msg: The message we want to send.
> + *
> + * This is normally pretty straightforward except if we are trying to send
> + * an ACTIVE_ONLY message but don't have any active_only TCSes.
> + *
> + * Called without drv->lock held and with no tcs_lock locks held.
> + *
> + * Return: A pointer to a tcs_group or an ERR_PTR.
> + */
> static struct tcs_group *get_tcs_for_msg(struct rsc_drv *drv,
> const struct tcs_request *msg)
> {
> @@ -241,7 +281,9 @@ static struct tcs_group *get_tcs_for_msg(struct rsc_drv *drv,
> /*
> * If we are making an active request on a RSC that does not have a
> * dedicated TCS for active state use, then re-purpose a wake TCS to
> - * send active votes.
> + * send active votes. This is safe because we ensure any active-only
> + * transfers have finished before we use it (maybe by running from
> + * the last CPU in PM code).
> */
> tcs = &drv->tcs[type];
> if (msg->state == RPMH_ACTIVE_ONLY_STATE && !tcs->num_tcs)
> @@ -250,6 +292,22 @@ static struct tcs_group *get_tcs_for_msg(struct rsc_drv *drv,
> return tcs;
> }
>
> +/**
> + * get_req_from_tcs() - Get a stashed request that was xfering on the given TCS.
> + * @drv: The RSC controller.
> + * @tcs_id: The global ID of this TCS.
> + *
> + * For ACTIVE_ONLY transfers we want to call back into the client when the
> + * transfer finishes. To do this we need the "request" that the client
> + * originally provided us. This function grabs the request that we stashed
> + * when we started the transfer.
> + *
> + * This only makes sense for ACTIVE_ONLY transfers since those are the only
> + * ones we track sending (the only ones we enable interrupts for and the only
> + * ones we call back to the client for).
> + *
> + * Return: The stashed request.
> + */
> static const struct tcs_request *get_req_from_tcs(struct rsc_drv *drv,
> int tcs_id)
> {
> @@ -265,6 +323,23 @@ static const struct tcs_request *get_req_from_tcs(struct rsc_drv *drv,
> return NULL;
> }
>
> +/**
> + * __tcs_set_trigger() - Start xfer on a TCS or unset trigger on a borrowed TCS
> + * @drv: The controller.
> + * @tcs_id: The global ID of this TCS.
> + * @trigger: If true then untrigger/retrigger. If false then just untrigger.
> + *
> + * In the normal case we only ever call with "trigger=true" to start a
> + * transfer. That will un-trigger/disable the TCS from the last transfer
> + * then trigger/enable for this transfer.
> + *
> + * If we borrowed a wake TCS for an active-only transfer we'll also call
> + * this function with "trigger=false" to just do the un-trigger/disable
> + * before using the TCS for wake purposes again.
> + *
> + * Note that the AP is only in charge of triggering active-only transfers.
> + * The AP never triggers sleep/wake values using this function.
> + */
> static void __tcs_set_trigger(struct rsc_drv *drv, int tcs_id, bool trigger)
> {
> u32 enable;
> @@ -289,6 +364,15 @@ static void __tcs_set_trigger(struct rsc_drv *drv, int tcs_id, bool trigger)
> }
> }
>
> +/**
> + * enable_tcs_irq() - Enable or disable interrupts on the given TCS.
> + * @drv: The controller.
> + * @tcs_id: The global ID of this TCS.
> + * @enable: If true then enable; if false then disable
> + *
> + * We only ever call this when we borrow a wake TCS for an active-only
> + * transfer. For active-only TCSes interrupts are always left enabled.
> + */
> static void enable_tcs_irq(struct rsc_drv *drv, int tcs_id, bool enable)
> {
> u32 data;
> @@ -302,7 +386,14 @@ static void enable_tcs_irq(struct rsc_drv *drv, int tcs_id, bool enable)
> }
>
> /**
> - * tcs_tx_done: TX Done interrupt handler
> + * tcs_tx_done() - TX Done interrupt handler.
> + * @irq: The IRQ number (ignored).
> + * @p: Pointer to "struct rsc_drv".
> + *
> + * Called for ACTIVE_ONLY transfers (those are the only ones we enable the
> + * IRQ for) when a transfer is done.
> + *
> + * Return: IRQ_HANDLED
> */
> static irqreturn_t tcs_tx_done(int irq, void *p)
> {
> @@ -367,6 +458,16 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
> return IRQ_HANDLED;
> }
>
> +/**
> + * __tcs_buffer_write() - Write to TCS hardware from a request; don't trigger.
> + * @drv: The controller.
> + * @tcs_id: The global ID of this TCS.
> + * @cmd_id: The index within the TCS to start writing.
> + * @msg: The message we want to send, which will contain several addr/data
> + * pairs to program (but few enough that they all fit in one TCS).
> + *
> + * This is used for all types of transfers (active, sleep, and wake).
> + */
> static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
> const struct tcs_request *msg)
> {
> @@ -400,6 +501,26 @@ static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
> write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id, cmd_enable);
> }
>
> +/**
> + * check_for_req_inflight() - Look to see if conflicting cmds are in flight.
> + * @drv: The controller.
> + * @tcs: A pointer to the tcs_group used for ACTIVE_ONLY transfers.
> + * @msg: The message we want to send, which will contain several addr/data
> + * pairs to program (but few enough that they all fit in one TCS).
> + *
> + * This will walk through the TCSes in the group and check if any of them
> + * appear to be sending to addresses referenced in the message. If it finds
> + * one it'll return -EBUSY.
> + *
> + * Only for use for active-only transfers.
> + *
> + * Must be called with the drv->lock held since that protects tcs_in_use.
> + *
> + * Return: 0 if nothing in flight or -EBUSY if we should try again later.
> + * The caller must re-enable interrupts between tries since that's
> + * the only way tcs_is_free() will ever return true and the only way
> + * RSC_DRV_CMD_ENABLE will ever be cleared.
> + */
> static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
> const struct tcs_request *msg)
> {
> @@ -426,6 +547,15 @@ static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
> return 0;
> }
>
> +/**
> + * find_free_tcs() - Find free tcs in the given tcs_group; only for active.
> + * @tcs: A pointer to the active-only tcs_group (or the wake tcs_group if
> + * we borrowed it because there are zero active-only ones).
> + *
> + * Must be called with the drv->lock held since that protects tcs_in_use.
> + *
> + * Return: The first tcs that's free.
> + */
> static int find_free_tcs(struct tcs_group *tcs)
> {
> int i;
> @@ -438,6 +568,20 @@ static int find_free_tcs(struct tcs_group *tcs)
> return -EBUSY;
> }
>
> +/**
> + * tcs_write() - Store messages into a TCS right now, or return -EBUSY.
> + * @drv: The controller.
> + * @msg: The data to be sent.
> + *
> + * Grabs a TCS for ACTIVE_ONLY transfers and writes the messages to it.
> + *
> + * If there are no free TCSes for ACTIVE_ONLY transfers or if a command for
> + * the same address is already transferring returns -EBUSY which means the
> + * client should retry shortly.
> + *
> + * Return: 0 on success, -EBUSY if client should retry, or an error.
> + * Client should have interrupts enabled for a bit before retrying.
> + */
> static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
> {
> struct tcs_group *tcs;
> @@ -491,14 +635,26 @@ static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
> }
>
> /**
> - * rpmh_rsc_send_data: Validate the incoming message and write to the
> - * appropriate TCS block.
> + * rpmh_rsc_send_data() - Validate the incoming message + write to TCS block.
> + * @drv: The controller.
> + * @msg: The data to be sent.
> *
> - * @drv: the controller
> - * @msg: the data to be sent
> + * NOTES:
> + * - This is only used for "ACTIVE_ONLY" since the limitations of this
> + * function don't make sense for sleep/wake cases.
> + * - To do the transfer, we will grab a whole TCS for ourselves--we don't
> + * try to share. If there are none available we'll wait indefinitely
> + * for a free one.
> + * - This function will not wait for the commands to be finished, only for
> + * data to be programmed into the RPMh. See rpmh_tx_done() which will
> + * be called when the transfer is fully complete.
> + * - This function must be called with interrupts enabled. If the hardware
> + * is busy doing someone else's transfer we need that transfer to fully
> + * finish so that we can have the hardware, and to fully finish it needs
> + * the interrupt handler to run. If the interrupts is set to run on the
> + * active CPU this can never happen if interrupts are disabled.
> *
> * Return: 0 on success, -EINVAL on error.
> - * Note: This call blocks until a valid data is written to the TCS.
> */
> int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg)
> {
> @@ -522,13 +678,30 @@ int rpmh_rsc_send_data(struct rsc_drv *drv, const struct tcs_request *msg)
> return ret;
> }
>
> +/**
> + * find_slots() - Find a place to write the given message.
> + * @tcs: The tcs group to search.
> + * @msg: The message we want to find room for.
> + * @tcs_id: If we return 0 from the function, we return the global ID of the
> + * TCS to write to here.
> + * @cmd_id: If we return 0 from the function, we return the index of
> + * the command array of the returned TCS where the client should
> + * start writing the message.
> + *
> + * Only for use on sleep/wake TCSes since those are the only ones we maintain
> + * tcs->slots for.
> + *
> + * Must be called with the tcs_lock for the group held.
> + *
> + * Return: -ENOMEM if there was no room, else 0.
> + */
> static int find_slots(struct tcs_group *tcs, const struct tcs_request *msg,
> int *tcs_id, int *cmd_id)
> {
> int slot, offset;
> int i = 0;
>
> - /* Do over, until we can fit the full payload in a TCS */
> + /* Do over, until we can fit the full payload in a single TCS */
> do {
> slot = bitmap_find_next_zero_area(tcs->slots, MAX_TCS_SLOTS,
> i, msg->num_cmds, 0);
> @@ -547,12 +720,14 @@ static int find_slots(struct tcs_group *tcs, const struct tcs_request *msg,
> }
>
> /**
> - * rpmh_rsc_write_ctrl_data: Write request to the controller
> + * rpmh_rsc_write_ctrl_data() - Write request to controller but don't trigger.
> + * @drv: The controller.
> + * @msg: The data to be written to the controller.
> *
> - * @drv: the controller
> - * @msg: the data to be written to the controller
> + * This should only be called for for sleep/wake state, never active-only
> + * state.
> *
> - * There is no response returned for writing the request to the controller.
> + * Return: 0 if no error; else -error.
> */
> int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv, const struct tcs_request *msg)
> {
> @@ -587,7 +762,6 @@ int rpmh_rsc_write_ctrl_data(struct rsc_drv *drv, const struct tcs_request *msg)
>
> /**
> * rpmh_rsc_ctrlr_is_busy() - Check if any of the AMCs are busy.
> - *
> * @drv: The controller
> *
> * Checks if any of the AMCs are busy in handling ACTIVE sets.
> @@ -623,6 +797,23 @@ static bool rpmh_rsc_ctrlr_is_busy(struct rsc_drv *drv)
> return false;
> }
>
> +/**
> + * rpmh_rsc_cpu_pm_callback() - Check if any of the AMCs are busy.
> + * @nfb: Pointer to the notifier block in struct rsc_drv.
> + * @action: CPU_PM_ENTER, CPU_PM_ENTER_FAILED, or CPU_PM_EXIT.
> + * @v: Unused
> + *
> + * This function is given to cpu_pm_register_notifier so we can be informed
> + * about when CPUs go down. When all CPUs go down we know no more active
> + * transfers will be started so we write sleep/wake sets. This function gets
> + * called from cpuidle code paths and also at system suspend time.
> + *
> + * If its last CPU going down and AMCs are not busy then writes cached sleep
> + * and wake messages to TCSes. The firmware then takes care of triggering
> + * them when entering deepest low power modes.
> + *
> + * Return: See cpu_pm_register_notifier.
> + */
> static int rpmh_rsc_cpu_pm_callback(struct notifier_block *nfb,
> unsigned long action, void *v)
> {

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2020-04-08 13:26    [W:0.347 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site