lkml.org 
[lkml]   [2020]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] gpu/drm: ingenic: Add trick to support 16bpp on 24-bit panels
Hi,

Any feedback for this patchset?

Thanks,
-Paul


Le mer. 26 févr. 2020 à 1:30, Paul Cercueil <paul@crapouillou.net> a
écrit :
> If the panel interface is 24-bit but our primary plane is 16bpp,
> configure as if the panel was 18-bit. This tricks permits the display
> of 16bpp data on a 24-bit panel by wiring each color component to the
> MSBs of the 24-bit interface.
>
> v2: Check bytes-per-pixel count instead of fourcc format
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> drivers/gpu/drm/ingenic/ingenic-drm.c | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.c
> b/drivers/gpu/drm/ingenic/ingenic-drm.c
> index 6d47ef7b148c..5493a80d7d2f 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm.c
> @@ -400,6 +400,8 @@ static void
> ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
> struct drm_display_mode *mode = &crtc_state->adjusted_mode;
> struct drm_connector *conn = conn_state->connector;
> struct drm_display_info *info = &conn->display_info;
> + struct drm_plane_state *plane_state =
> crtc_state->crtc->primary->state;
> + const struct drm_format_info *finfo = NULL;
> unsigned int cfg;
>
> priv->panel_is_sharp = info->bus_flags & DRM_BUS_FLAG_SHARP_SIGNALS;
> @@ -435,7 +437,21 @@ static void
> ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
> cfg |= JZ_LCD_CFG_MODE_GENERIC_18BIT;
> break;
> case MEDIA_BUS_FMT_RGB888_1X24:
> - cfg |= JZ_LCD_CFG_MODE_GENERIC_24BIT;
> + if (plane_state && plane_state->fb)
> + finfo = plane_state->fb->format;
> +
> + /*
> + * If the panel interface is 24-bit but our
> + * primary plane is 16bpp, configure as if the
> + * panel was 18-bit. This tricks permits the
> + * display of 16bpp data on a 24-bit panel by
> + * wiring each color component to the MSBs of
> + * the 24-bit interface.
> + */
> + if (finfo && finfo->cpp[0] < 3)
> + cfg |= JZ_LCD_CFG_MODE_GENERIC_18BIT;
> + else
> + cfg |= JZ_LCD_CFG_MODE_GENERIC_24BIT;
> break;
> case MEDIA_BUS_FMT_RGB888_3X8:
> cfg |= JZ_LCD_CFG_MODE_8BIT_SERIAL;
> --
> 2.25.0
>


\
 
 \ /
  Last update: 2020-04-08 11:54    [W:0.041 / U:25.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site