Messages in this thread Patch in this message | | | From | Philippe Schenker <> | Subject | [PATCH net-next v2 2/2] ARM: dts: apalis-imx6qdl: use rgmii-id instead of rgmii | Date | Wed, 25 Mar 2020 18:34:25 +0100 |
| |
Until now a PHY-fixup in mach-imx set our rgmii timing correctly. For the PHY KSZ9131 there is no PHY-fixup in mach-imx. To support this PHY too, use rgmii-id. For the now used KSZ9031 nothing will change, as rgmii-id is only implemented and supported by the KSZ9131.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
Changes in v2: None
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 1b5bc6b5e806..347a5edc6927 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -180,7 +180,7 @@ &ecspi2 { &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy>; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; -- 2.26.0
| |