lkml.org 
[lkml]   [2020]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 03/48] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary
From
Date
Hello Dmitry

On 2020/03/18 7:44, Dmitry Osipenko wrote:
> 12.02.2020 11:41, Jiada Wang пишет:
>> From: Nick Dyer <nick.dyer@itdev.co.uk>
>>
>> The workaround of reading all messages until an invalid is received is a
>> way of forcing the CHG line high, which means that when using
>> edge-triggered interrupts the interrupt can be acquired.
>>
>> With level-triggered interrupts the workaround is unnecessary.
>>
>> Also, most recent maXTouch chips have a feature called RETRIGEN which, when
>> enabled, reasserts the interrupt line every cycle if there are messages
>> waiting. This also makes the workaround unnecessary.
>>
>> Note: the RETRIGEN feature is only in some firmware versions/chips, it's
>> not valid simply to enable the bit.
>
> ...
>> +static int mxt_check_retrigen(struct mxt_data *data)
>> +{
>> + struct i2c_client *client = data->client;
>> + int error;
>> + int val;
>> +
>> + data->use_retrigen_workaround = false;
>> +
>> + if (irq_get_trigger_type(data->irq) & IRQF_TRIGGER_LOW)
>> + return 0;
>> +
>> + if (data->T18_address) {
>> + error = __mxt_read_reg(client,
>> + data->T18_address + MXT_COMMS_CTRL,
>> + 1, &val);
>> + if (error)
>> + return error;
>> +
>> + if (val & MXT_COMMS_RETRIGEN)
>> + return 0;
>> + }
>> +
>> + dev_warn(&client->dev, "Enabling RETRIGEN workaround\n");
>> + data->use_retrigen_workaround = true;
>> + return 0;
>> +}
>
> Hello Jiada,
>
> I'm seeing "Enabling RETRIGEN workaround" message with the following
> device-tree entry:
>
> touchscreen@4c {
> compatible = "atmel,maxtouch";
> reg = <0x4c>;
>
> interrupt-parent = <&gpio>;
> interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
>
> reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
> };
>
> This happens because data->irq is NULL. Please fix it, thanks in advance.
Thanks for reporting this issue,
I will fix this issue in v8 patch-set

Thanks,
Jiada
>

\
 
 \ /
  Last update: 2020-03-18 14:04    [W:0.122 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site