lkml.org 
[lkml]   [2020]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add poweroff node to DT
On Tue, Nov 24, 2020 at 03:26:56PM +0100, Maxime Ripard wrote:
>On Tue, Nov 24, 2020 at 02:36:33PM +0100, Michael Klein wrote:
>> Add poweroff node to allow the board to power itself off after shutdown
>> by disabling the SYSTEM and CPUX regulators (U5 resp. U6). The RST
>> button can be used to restart the board.
>>
>> Signed-off-by: Michael Klein <michael@fossekall.de>
>> ---
>> arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 5 +++++
>> 1 file changed, 5 insertions(+)
>
>You should have a summary of the changes between versions here
>
>> diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> index 4c6704e4c57e..ea2fa48a1647 100644
>> --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
>> @@ -46,6 +46,11 @@ sw4 {
>> };
>> };
>>
>> + poweroff {
>> + compatible = "gpio-poweroff";
>> + gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
>> + };
>> +
>
>Like I said in the previous version, this should really be modelled as a
>regulator instead of just a GPIO

Please excuse my ignorance, do you mean something like this?

reg_vdd_sys: vdd-sys {
compatible = "regulator-fixed";
regulator-name = "vdd-sys";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
vin-supply = <&reg_vcc5v0>;
};

With this, the board still draws 60mA (cheap USB ampere meter) after
shutdown, presumably because of "regulator-always-on". Without this
property the board powers off shortly after booting up.

Michael

\
 
 \ /
  Last update: 2020-11-24 23:39    [W:0.098 / U:1.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site