Messages in this thread | | | Subject | Re: [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED | From | Dan Murphy <> | Date | Thu, 26 Sep 2019 07:00:06 -0500 |
| |
Jacek
On 9/25/19 4:31 PM, Jacek Anaszewski wrote: > Dan, > > On 9/25/19 7:46 PM, Dan Murphy wrote: >> Update the document to be consistent in case when using LED. > s/LED/"LED"/.
ACK
> >> This should be capital throughout the document. >> >> Signed-off-by: Dan Murphy <dmurphy@ti.com> >> --- >> Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt >> index 1b66a413fb9d..bfe2805c5534 100644 >> --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt >> +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt >> @@ -1,4 +1,4 @@ >> -Binding for TI/National Semiconductor LP55xx Led Drivers >> +Binding for TI/National Semiconductor LP55xx LED Drivers >> >> Required properties: >> - compatible: one of >> @@ -12,8 +12,8 @@ Required properties: >> - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external) >> >> Each child has own specific current settings >> -- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected) >> -- max-cur: Maximun current at each led channel. >> +- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected) >> +- max-cur: Maximun current at each LED channel. >> >> Optional properties: >> - enable-gpio: GPIO attached to the chip's enable pin >>
| |