lkml.org 
[lkml]   [2019]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/5] spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
Date
The DSPI interrupt can be shared between two controllers at least on the
LX2160A. In that case, the driver for one controller might misbehave and
consume the other's interrupt. Fix this by actually checking if any of
the bits in the status register have been asserted.

Fixes: 13aed2392741 ("spi: spi-fsl-dspi: use IRQF_SHARED mode to request IRQ")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
---
drivers/spi/spi-fsl-dspi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index c90db7db4121..6ef2279a3699 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -659,7 +659,7 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id)
regmap_write(dspi->regmap, SPI_SR, spi_sr);

if (!(spi_sr & (SPI_SR_EOQF | SPI_SR_TCFQF)))
- return IRQ_HANDLED;
+ return IRQ_NONE;

/* Get transfer counter (in number of SPI transfers). It was
* reset to 0 when transfer(s) were started.
--
2.17.1
\
 
 \ /
  Last update: 2019-08-22 23:18    [W:0.089 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site