lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 07/11] drm/bridge: dw-hdmi: allow ycbcr420 modes for >= 0x200a
Date
Now the DW-HDMI Controller supports the HDMI2.0 modes, enable support
for these modes in the connector if the platform supports them.
We limit these modes to DW-HDMI IP version >= 0x200a which
are designed to support HDMI2.0 display modes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 6 ++++++
include/drm/bridge/dw_hdmi.h | 1 +
2 files changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 316823abdd00..cb560b231d74 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2793,6 +2793,12 @@ __dw_hdmi_probe(struct platform_device *pdev,
hdmi->bridge.of_node = pdev->dev.of_node;
#endif

+ if (hdmi->version >= 0x200a)
+ hdmi->connector.ycbcr_420_allowed =
+ hdmi->plat_data->ycbcr_420_allowed;
+ else
+ hdmi->connector.ycbcr_420_allowed = false;
+
memset(&pdevinfo, 0, sizeof(pdevinfo));
pdevinfo.parent = dev;
pdevinfo.id = PLATFORM_DEVID_AUTO;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index c402364aec0d..04e63ed29417 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -126,6 +126,7 @@ struct dw_hdmi_plat_data {
const struct drm_display_mode *mode);
unsigned long input_bus_format;
unsigned long input_bus_encoding;
+ bool ycbcr_420_allowed;

/* Vendor PHY support */
const struct dw_hdmi_phy_ops *phy_ops;
--
2.22.0
\
 
 \ /
  Last update: 2019-08-20 10:42    [W:0.083 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site