lkml.org 
[lkml]   [2019]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] drm: bridge: adv7511: Add support for ADV7535
Hi Bogdan.

> > > adv7533_detach_dsi(adv7511);
> > > i2c_unregister_device(adv7511->i2c_cec);
> > > if (adv7511->cec_clk)
> > > @@ -1266,8 +1278,9 @@ static const struct i2c_device_id
> > > adv7511_i2c_ids[] = {
> > > { "adv7511", ADV7511 },
> > > { "adv7511w", ADV7511 },
> > > { "adv7513", ADV7511 },
> > > -#ifdef CONFIG_DRM_I2C_ADV7533
> > > +#ifdef CONFIG_DRM_I2C_ADV753x
> > > { "adv7533", ADV7533 },
> > > + { "adv7535", ADV7535 },
> > > #endif
> >
> > This ifdef may not be needed??
> > If we did not get this type we will not look it up.
> But if we have defined in DT adv7533/5 device but
> CONFIG_DRM_I2C_ADV753x not selected probe will fail with ENODEV. That
> would be ok?

What do we gain from this complexity in the end.
Why not let the driver always support all variants.

If this result in a simpler driver, and less choices in Kconfig
then it is a win-win.

Sam

\
 
 \ /
  Last update: 2019-08-19 12:47    [W:0.051 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site