lkml.org 
[lkml]   [2019]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 1/2] dt-bindings: mmc: Document Aspeed SD controller


On Thu, 15 Aug 2019, at 15:06, Joel Stanley wrote:
> On Wed, 7 Aug 2019 at 00:38, Andrew Jeffery <andrew@aj.id.au> wrote:
> >
> > The ASPEED SD/SDIO/MMC controller exposes two slots implementing the
> > SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
> > data bus if only a single slot is enabled.
> >
> > Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
>
> Reviewed-by: Joel Stanley <joel@jms.id.au>
>
> Two minor comments below.
>
> > +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> > @@ -0,0 +1,105 @@
> > +# SPDX-License-Identifier: GPL-2.0-or-later
>
> No "Copyright IBM" ?

I'm going rogue.

That reminds me I should chase up where we got to with the binding
licensing.

>
> > +%YAML 1.2
> > +---
>
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/aspeed-clock.h>
> > + sdc@1e740000 {
> > + compatible = "aspeed,ast2500-sd-controller";
> > + reg = <0x1e740000 0x100>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0x1e740000 0x10000>;
>
> According to the datasheet this could be 0x20000. It does not matter
> though, as there's nothing in it past 0x300.

Good catch.

Andrew

\
 
 \ /
  Last update: 2019-08-15 07:43    [W:0.112 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site