lkml.org 
[lkml]   [2019]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC 10/11] ARM: dts: qcom: msm8974: add HDMI nodes
Date
Add HDMI tx and phy nodes to support an external display that can be
connected over the SlimPort. This is based on work from Jonathan Marek.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
The hdmi-tx node in the downstream MSM sources:
https://github.com/AICP/kernel_lge_hammerhead/blob/n7.1/arch/arm/boot/dts/msm8974-mdss.dtsi#L101

arch/arm/boot/dts/qcom-msm8974.dtsi | 80 +++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 369e58f64145..35c51336a9d4 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1139,6 +1139,13 @@

port@0 {
reg = <0>;
+ mdp5_intf3_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
mdp5_intf1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
@@ -1216,6 +1223,79 @@
clocks = <&mmcc MDSS_AHB_CLK>;
clock-names = "iface";
};
+
+ hdmi: hdmi-tx@fd922100 {
+ status = "disabled";
+
+ compatible = "qcom,hdmi-tx-8974";
+ reg = <0xfd922100 0x35c>,
+ <0xfc4b8000 0x60f0>;
+ reg-names = "core_physical",
+ "qfprom_physical";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&mmcc MDSS_GDSC>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_HDMI_CLK>,
+ <&mmcc MDSS_HDMI_AHB_CLK>,
+ <&mmcc MDSS_EXTPCLK_CLK>;
+ clock-names = "mdp_core",
+ "iface",
+ "core",
+ "alt_iface",
+ "extp";
+
+ hpd-5v-supply = <&pm8941_5vs2>;
+ core-vdda-supply = <&pm8941_l12>;
+ core-vcc-supply = <&pm8941_s3>;
+
+ /*
+ * FIXME - drivers/gpu/drm/msm/hdmi/hdmi.c via hpd_reg_names_8x74
+ * looks for hpd-gdsc-supply. What should be used here? Shouldn't
+ * this functionality be provided by the power-domains above?
+ */
+
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi_phy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ hdmi_in: endpoint {
+ remote-endpoint = <&mdp5_intf3_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ hdmi_phy: hdmi-phy@fd922500 {
+ status = "disabled";
+
+ compatible = "qcom,hdmi-phy-8974";
+ reg = <0xfd922500 0x7c>;
+ reg-names = "hdmi_phy";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_HDMI_AHB_CLK>;
+ clock-names = "iface",
+ "alt_iface";
+
+ core-vdda-supply = <&pm8941_l12>;
+ vddio-supply = <&pm8941_s3>;
+
+ #phy-cells = <0>;
+ };
};
};

--
2.21.0
\
 
 \ /
  Last update: 2019-08-15 02:56    [W:0.201 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site