Messages in this thread | | | Date | Tue, 13 Aug 2019 11:02:20 +0200 | From | Johan Hovold <> | Subject | Re: [PATCH] USB: serial: ftdi_sio: add support for FT232H CBUS gpios |
| |
On Thu, Aug 08, 2019 at 10:23:48PM +0000, Matthew Michilot wrote: > Enable support for cbus gpios on FT232H. The cbus configuration is > stored in one word in the EEPROM at byte-offset 0x1a with the mux > config for ACBUS5, ACBUS6, ACBUS8 and ACBUS9 (only pins that can be > configured as I/O mode). > > Tested using FT232H by configuring one ACBUS pin at a time. > > Review-by: Tim Harvey <tharvey@gateworks.com> > Signed-off-by: Matthew Michilot <matthew.michilot@gmail.com>
Also make sure your SoB matches the From line.
Johan
| |