lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/6] tpm: tpm_tis_spi: Add a pre-transfer callback
Date
Cr50 firmware has a requirement to wait for the TPM to wakeup before
sending commands over the SPI bus. Otherwise, the firmware could be in
deep sleep and not respond. Add a hook to tpm_tis_spi_transfer() before
we start a SPI transfer so we can keep track of the last time the TPM
driver accessed the SPI bus.

Cc: Andrey Pronin <apronin@chromium.org>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
drivers/char/tpm/tpm_tis_spi.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/char/tpm/tpm_tis_spi.c b/drivers/char/tpm/tpm_tis_spi.c
index 819602e85b34..93f49b1941f0 100644
--- a/drivers/char/tpm/tpm_tis_spi.c
+++ b/drivers/char/tpm/tpm_tis_spi.c
@@ -44,6 +44,7 @@ struct tpm_tis_spi_phy {
struct spi_device *spi_device;
int (*flow_control)(struct tpm_tis_spi_phy *phy,
struct spi_transfer *xfer);
+ void (*pre_transfer)(struct tpm_tis_spi_phy *phy);
u8 *iobuf;
};

@@ -129,6 +130,8 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,

spi_message_init(&m);
spi_message_add_tail(&spi_xfer, &m);
+ if (phy->pre_transfer)
+ phy->pre_transfer(phy);
ret = spi_sync_locked(phy->spi_device, &m);
if (ret < 0)
goto exit;
--
Sent by a computer through tubes
\
 
 \ /
  Last update: 2019-08-13 00:37    [W:0.145 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site