Messages in this thread | | | Subject | Re: [PATCH v5 00/18] add thermal driver for h6 | From | Clément Péron <> | Date | Sun, 11 Aug 2019 23:14:30 +0200 |
| |
Hi Yangtao,
On 10/08/2019 07:28, Yangtao Li wrote: > This patchset add support for A64, H3, H5, H6 and R40 thermal sensor.
Could you add the device-tree configuration in the same series? This will allow user to test it.
Thanks, Clément
> > Thx to Icenowy and Vasily. > > BTY, do a cleanup in thermal makfile. > > Icenowy Zheng (3): > thermal: sun8i: allow to use custom temperature calculation function > thermal: sun8i: add support for Allwinner H5 thermal sensor > thermal: sun8i: add support for Allwinner R40 thermal sensor > > Vasily Khoruzhick (1): > thermal: sun8i: add thermal driver for A64 > > Yangtao Li (14): > thermal: sun8i: add thermal driver for h6 > dt-bindings: thermal: add binding document for h6 thermal controller > thermal: fix indentation in makefile > thermal: sun8i: get ths sensor number from device compatible > thermal: sun8i: rework for sun8i_ths_get_temp() > thermal: sun8i: get ths init func from device compatible > thermal: sun8i: rework for ths irq handler func > thermal: sun8i: support mod clocks > thermal: sun8i: rework for ths calibrate func > dt-bindings: thermal: add binding document for h3 thermal controller > thermal: sun8i: add thermal driver for h3 > dt-bindings: thermal: add binding document for a64 thermal controller > dt-bindings: thermal: add binding document for h5 thermal controller > dt-bindings: thermal: add binding document for r40 thermal controller > > .../bindings/thermal/sun8i-thermal.yaml | 157 +++++ > MAINTAINERS | 7 + > drivers/thermal/Kconfig | 14 + > drivers/thermal/Makefile | 9 +- > drivers/thermal/sun8i_thermal.c | 596 ++++++++++++++++++ > 5 files changed, 779 insertions(+), 4 deletions(-) > create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml > create mode 100644 drivers/thermal/sun8i_thermal.c > --- > v5: > -add more support > -some trival fix > --- > 2.17.1 > >
| |