lkml.org 
[lkml]   [2019]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 4/9] pinctrl: sunxi: Support I/O bias voltage setting on H6
On Sat, Apr 13, 2019 at 6:54 PM <megous@megous.com> wrote:

> From: Ondrej Jirman <megous@megous.com>
>
> H6 SoC has a "pio group withstand voltage mode" register (datasheet
> description), that needs to be used to select either 1.8V or 3.3V I/O mode,
> based on what voltage is powering the respective pin banks and is thus used
> for I/O signals.
>
> Add support for configuring this register according to the voltage of the
> pin bank regulator (if enabled).
>
> This is similar to the support for I/O bias voltage setting patch for A80
> and the same concerns apply. See:
>
> commit 402bfb3c1352 ("Support I/O bias voltage setting on A80")
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

This patch applied to the pinctrl tree for v5.2.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2019-04-23 12:33    [W:0.192 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site