Messages in this thread | | | From | Baruch Siach <> | Subject | Re: [PATCH v3] ARM: debug-ll: add default address for digicolor | Date | Wed, 17 Apr 2019 20:00:10 +0300 |
| |
Hi Arnd,
On Wed, Apr 17 2019, Arnd Bergmann wrote: > The digicolor platform has three UARTs, but the Kconfig.debug > file explicitly lists port zero as the one to be used for the > console, while not providing any default values. > > This can get an automated randconfig build stuck in a loop > waiting for the user to input the number. As we already know > the physical address, this patch provides that number as > default, along with a reasonable default value for the virtual > address. > > Cc: Baruch Siach <baruch@tkos.co.il> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Thanks, baruch
> --- > arch/arm/Kconfig.debug | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug > index a8a1e14f20ab..3e33753bd60c 100644 > --- a/arch/arm/Kconfig.debug > +++ b/arch/arm/Kconfig.debug > @@ -1676,6 +1676,7 @@ config DEBUG_UART_PHYS > default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1 > default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4 > default 0xe8008000 if DEBUG_R7S72100_SCIF2 > + default 0xf0000000 if DEBUG_DIGICOLOR_UA0 > default 0xf0000be0 if ARCH_EBSA110 > default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE > default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE > @@ -1728,6 +1729,7 @@ config DEBUG_UART_VIRT > default 0xe0010fe0 if ARCH_RPC > default 0xf0000be0 if ARCH_EBSA110 > default 0xf0010000 if DEBUG_ASM9260_UART > + default 0xf0100000 if DEBUG_DIGICOLOR_UA0 > default 0xf01fb000 if DEBUG_NOMADIK_UART > default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 > default 0xf1000300 if DEBUG_BCM_5301X
-- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
| |