lkml.org 
[lkml]   [2019]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 12/17] net: dsa: sja1105: Add support for VLAN operations
Date
VLAN filtering cannot be properly disabled in SJA1105. So in order to
emulate the "no VLAN awareness" behavior (not dropping traffic that is
tagged with a VID that isn't configured on the port), we need to hack
another switch feature: programmable TPID (which is 0x8100 for 802.1Q).
We are reprogramming the TPID to a bogus value (ETH_P_EDSA) which leaves
the switch thinking that all traffic is untagged, and therefore accepts
it.

Under a vlan_filtering bridge, the proper TPID of ETH_P_8021Q is
installed again, and the switch starts identifying 802.1Q-tagged
traffic.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/sja1105/sja1105_main.c | 260 +++++++++++++++++-
.../net/dsa/sja1105/sja1105_static_config.c | 38 +++
.../net/dsa/sja1105/sja1105_static_config.h | 3 +
3 files changed, 299 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 93d1f607eeab..028ed1ebe358 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -260,6 +260,13 @@ static int sja1105_init_static_vlan(struct sja1105_private *priv)
table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP];

/* The static VLAN table will only contain the initial pvid of 0.
+ * All other VLANs are to be configured through dynamic entries,
+ * and kept in the static configuration table as backing memory.
+ * The pvid of 0 is sufficient to pass traffic while the ports are
+ * standalone and when vlan_filtering is disabled. When filtering
+ * gets enabled, the switchdev core sets up the VLAN ID 1 and sets
+ * it as the new pvid. Actually 'pvid 1' still comes up in 'bridge
+ * vlan' even when vlan_filtering is off, but it has no effect.
*/
if (table->entry_count) {
kfree(table->entries);
@@ -400,8 +407,11 @@ static int sja1105_init_general_params(struct sja1105_private *priv)
.vlmask = 0,
/* Only update correctionField for 1-step PTP (L2 transport) */
.ignore2stf = 0,
- .tpid = ETH_P_8021Q,
- .tpid2 = ETH_P_8021Q,
+ /* Forcefully disable VLAN filtering by telling
+ * the switch that VLAN has a different EtherType.
+ */
+ .tpid = ETH_P_EDSA,
+ .tpid2 = ETH_P_EDSA,
/* P/Q/R/S only */
.queue_ts = 0,
.egrmirrvid = 0,
@@ -930,12 +940,245 @@ static void sja1105_bridge_leave(struct dsa_switch *ds, int port,
sja1105_bridge_member(ds, port, br, false);
}

+/* For situations where we need to change a setting at runtime that is only
+ * available through the static configuration, resetting the switch in order
+ * to upload the new static config is unavoidable. Back up the settings we
+ * modify at runtime (currently only MAC) and restore them after uploading,
+ * such that this operation is relatively seamless.
+ */
+static int sja1105_static_config_reload(struct sja1105_private *priv)
+{
+ struct sja1105_mac_config_entry *mac;
+ int speed_mbps[SJA1105_NUM_PORTS];
+ int rc, i;
+
+ mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
+
+ /* Back up settings changed by sja1105_adjust_port_config and
+ * and restore their defaults.
+ */
+ for (i = 0; i < SJA1105_NUM_PORTS; i++) {
+ speed_mbps[i] = sja1105_speed[mac[i].speed];
+ mac[i].speed = SJA1105_SPEED_AUTO;
+ }
+
+ /* Reset switch and send updated static configuration */
+ rc = sja1105_static_config_upload(priv);
+ if (rc < 0)
+ goto out;
+
+ /* Configure the CGU (PLLs) for MII and RMII PHYs.
+ * For these interfaces there is no dynamic configuration
+ * needed, since PLLs have same settings at all speeds.
+ */
+ rc = sja1105_clocking_setup(priv);
+ if (rc < 0)
+ goto out;
+
+ for (i = 0; i < SJA1105_NUM_PORTS; i++) {
+ bool enabled = (speed_mbps[i] != 0);
+
+ rc = sja1105_adjust_port_config(priv, i, speed_mbps[i],
+ enabled);
+ if (rc < 0)
+ goto out;
+ }
+out:
+ return rc;
+}
+
+#define sja1105_vlan_filtering_enabled(priv) \
+ (((struct sja1105_general_params_entry *) \
+ ((struct sja1105_private *)priv)->static_config. \
+ tables[BLK_IDX_GENERAL_PARAMS].entries)->tpid == ETH_P_8021Q)
+
+/* The TPID setting belongs to the General Parameters table,
+ * which can only be partially reconfigured at runtime (and not the TPID).
+ * So a switch reset is required.
+ */
+static int sja1105_change_tpid(struct sja1105_private *priv,
+ u16 tpid, u16 tpid2)
+{
+ struct sja1105_general_params_entry *general_params;
+ struct sja1105_table *table;
+
+ table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS];
+ general_params = table->entries;
+ general_params->tpid = tpid;
+ general_params->tpid2 = tpid2;
+ return sja1105_static_config_reload(priv);
+}
+
+static int sja1105_pvid_apply(struct sja1105_private *priv, int port, u16 pvid)
+{
+ struct sja1105_mac_config_entry *mac;
+
+ mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
+
+ mac[port].vlanid = pvid;
+
+ return sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port,
+ &mac[port], true);
+}
+
+static int sja1105_is_vlan_configured(struct sja1105_private *priv, u16 vid)
+{
+ struct sja1105_vlan_lookup_entry *vlan;
+ int count, i;
+
+ vlan = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entries;
+ count = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entry_count;
+
+ for (i = 0; i < count; i++)
+ if (vlan[i].vlanid == vid)
+ return i;
+
+ /* Return an invalid entry index if not found */
+ return -1;
+}
+
+static int sja1105_vlan_apply(struct sja1105_private *priv, int port, u16 vid,
+ bool enabled, bool untagged)
+{
+ struct sja1105_vlan_lookup_entry *vlan;
+ struct sja1105_table *table;
+ bool keep = true;
+ int match, rc;
+
+ table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP];
+
+ match = sja1105_is_vlan_configured(priv, vid);
+ if (match < 0) {
+ /* Can't delete a missing entry. */
+ if (!enabled)
+ return 0;
+ rc = sja1105_table_resize(table, table->entry_count + 1);
+ if (rc)
+ return rc;
+ match = table->entry_count - 1;
+ }
+ /* Assign pointer after the resize (it's new memory) */
+ vlan = table->entries;
+ vlan[match].vlanid = vid;
+ if (enabled) {
+ vlan[match].vlan_bc |= BIT(port);
+ vlan[match].vmemb_port |= BIT(port);
+ } else {
+ vlan[match].vlan_bc &= ~BIT(port);
+ vlan[match].vmemb_port &= ~BIT(port);
+ }
+ /* Also unset tag_port if removing this VLAN was requested,
+ * just so we don't have a confusing bitmap (no practical purpose).
+ */
+ if (untagged || !enabled)
+ vlan[match].tag_port &= ~BIT(port);
+ else
+ vlan[match].tag_port |= BIT(port);
+ /* If there's no port left as member of this VLAN,
+ * it's time for it to go.
+ */
+ if (!vlan[match].vmemb_port)
+ keep = false;
+
+ dev_dbg(priv->ds->dev,
+ "%s: port %d, vid %llu, broadcast domain 0x%llx, "
+ "port members 0x%llx, tagged ports 0x%llx, keep %d\n",
+ __func__, port, vlan[match].vlanid, vlan[match].vlan_bc,
+ vlan[match].vmemb_port, vlan[match].tag_port, keep);
+
+ rc = sja1105_dynamic_config_write(priv, BLK_IDX_VLAN_LOOKUP, vid,
+ &vlan[match], keep);
+ if (rc < 0)
+ return rc;
+
+ if (!keep)
+ return sja1105_table_delete_entry(table, match);
+
+ return 0;
+}
+
static enum dsa_tag_protocol
sja1105_get_tag_protocol(struct dsa_switch *ds, int port)
{
return DSA_TAG_PROTO_NONE;
}

+/* This callback needs to be present */
+static int sja1105_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ return 0;
+}
+
+static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
+{
+ struct sja1105_private *priv = ds->priv;
+ int rc;
+
+ if (enabled && !sja1105_vlan_filtering_enabled(priv))
+ /* Enable VLAN filtering.
+ * TODO read these from bridge_dev->protocol.
+ */
+ rc = sja1105_change_tpid(priv, ETH_P_8021Q, ETH_P_8021AD);
+ else if (!enabled && sja1105_vlan_filtering_enabled(priv))
+ /* Disable VLAN filtering. TODO: Install a TPID
+ * that also encodes the switch ID (aka ds->index)
+ * so that stacking switch tags will be supported.
+ */
+ rc = sja1105_change_tpid(priv, ETH_P_EDSA, ETH_P_EDSA);
+ else
+ return 0;
+ if (rc)
+ dev_err(ds->dev, "Failed to change VLAN Ethertype\n");
+
+ return rc;
+}
+
+static void sja1105_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct sja1105_private *priv = ds->priv;
+ u16 vid;
+ int rc;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ rc = sja1105_vlan_apply(priv, port, vid, true, vlan->flags &
+ BRIDGE_VLAN_INFO_UNTAGGED);
+ if (rc < 0) {
+ dev_err(ds->dev, "Failed to add VLAN %d to port %d: %d\n",
+ vid, port, rc);
+ return;
+ }
+ if (vlan->flags & BRIDGE_VLAN_INFO_PVID) {
+ rc = sja1105_pvid_apply(ds->priv, port, vid);
+ if (rc < 0) {
+ dev_err(ds->dev, "Failed to set pvid %d on port %d: %d\n",
+ vid, port, rc);
+ return;
+ }
+ }
+ }
+}
+
+static int sja1105_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct sja1105_private *priv = ds->priv;
+ u16 vid;
+ int rc;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ rc = sja1105_vlan_apply(priv, port, vid, false, vlan->flags &
+ BRIDGE_VLAN_INFO_UNTAGGED);
+ if (rc < 0) {
+ dev_err(ds->dev, "Failed to remove VLAN %d from port %d: %d\n",
+ vid, port, rc);
+ return rc;
+ }
+ }
+ return 0;
+}
+
/* The programming model for the SJA1105 switch is "all-at-once" via static
* configuration tables. Some of these can be dynamically modified at runtime,
* but not the xMII mode parameters table.
@@ -971,6 +1214,15 @@ static int sja1105_setup(struct dsa_switch *ds)
dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc);
return rc;
}
+ /* On SJA1105, VLAN filtering per se is always enabled in hardware.
+ * The only thing we can do to disable it is lie about what the 802.1Q
+ * EtherType is. So it will still try to apply VLAN filtering, but all
+ * ingress traffic (except frames received with EtherType of
+ * ETH_P_EDSA, which are invalid) will be internally tagged with a
+ * distorted VLAN header where the TPID is ETH_P_EDSA, and the VLAN ID
+ * is the port pvid.
+ */
+ ds->vlan_filtering_is_global = true;

return 0;
}
@@ -984,6 +1236,10 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
.port_fdb_del = sja1105_fdb_del,
.port_bridge_join = sja1105_bridge_join,
.port_bridge_leave = sja1105_bridge_leave,
+ .port_vlan_prepare = sja1105_vlan_prepare,
+ .port_vlan_filtering = sja1105_vlan_filtering,
+ .port_vlan_add = sja1105_vlan_add,
+ .port_vlan_del = sja1105_vlan_del,
.port_mdb_prepare = sja1105_mdb_prepare,
.port_mdb_add = sja1105_mdb_add,
.port_mdb_del = sja1105_mdb_del,
diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c
index f5d1866216bd..c477f0520141 100644
--- a/drivers/net/dsa/sja1105/sja1105_static_config.c
+++ b/drivers/net/dsa/sja1105/sja1105_static_config.c
@@ -1034,3 +1034,41 @@ void sja1105_static_config_free(struct sja1105_static_config *config)
}
}

+int sja1105_table_delete_entry(struct sja1105_table *table, int i)
+{
+ size_t entry_size = table->ops->unpacked_entry_size;
+ u8 *entries = table->entries;
+
+ if (i > table->entry_count)
+ return -ERANGE;
+
+ memmove(entries + i * entry_size, entries + (i + 1) * entry_size,
+ (table->entry_count - i) * entry_size);
+
+ table->entry_count--;
+
+ return 0;
+}
+
+/* No pointers to table->entries should be kept when this is called. */
+int sja1105_table_resize(struct sja1105_table *table, size_t new_count)
+{
+ size_t entry_size = table->ops->unpacked_entry_size;
+ void *new_entries, *old_entries = table->entries;
+
+ if (new_count > table->ops->max_entry_count)
+ return -ERANGE;
+
+ new_entries = kcalloc(new_count, entry_size, GFP_KERNEL);
+ if (!new_entries)
+ return -ENOMEM;
+
+ memcpy(new_entries, old_entries, min(new_count, table->entry_count) *
+ entry_size);
+
+ table->entries = new_entries;
+ table->entry_count = new_count;
+ kfree(old_entries);
+ return 0;
+}
+
diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.h b/drivers/net/dsa/sja1105/sja1105_static_config.h
index 1c331c9e20b3..2f9db15a454d 100644
--- a/drivers/net/dsa/sja1105/sja1105_static_config.h
+++ b/drivers/net/dsa/sja1105/sja1105_static_config.h
@@ -297,6 +297,9 @@ int sja1105_static_config_init(struct sja1105_static_config *config,
u64 device_id, u64 part_nr);
void sja1105_static_config_free(struct sja1105_static_config *config);

+int sja1105_table_delete_entry(struct sja1105_table *table, int i);
+int sja1105_table_resize(struct sja1105_table *table, size_t new_count);
+
u32 sja1105_crc32(const void *buf, size_t len);

void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len);
--
2.17.1
\
 
 \ /
  Last update: 2019-03-31 19:44    [W:0.110 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site