Messages in this thread | | | Subject | Re: [PATCH v2] regulator: core: fix error path for regulator_set_voltage_unlocked | From | Dmitry Osipenko <> | Date | Mon, 18 Mar 2019 19:40:55 +0300 |
| |
18.03.2019 19:17, Steve Twiss пишет: > During several error paths in the function > regulator_set_voltage_unlocked() the value of 'ret' can take on negative > error values. However, in calls that go through the 'goto out' statement, > this return value is lost and return 0 is used instead, indicating a > 'pass'. > > There are several cases where this function should legitimately return a > fail instead of a pass: one such case includes constraints check during > voltage selection in the call to regulator_check_voltage(), which can > have -EINVAL for the case when an unsupported voltage is incorrectly > requested. In that case, -22 is expected as the return value, not 0. > > Fixes: 9243a195be7a ("regulator: core: Change voltage setting path") > Cc: stable <stable@vger.kernel.org> > Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> > --- > drivers/regulator/core.c | 11 ++++------- > 1 file changed, 4 insertions(+), 7 deletions(-) > > diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c > index 68473d0..968dcd9 100644 > --- a/drivers/regulator/core.c > +++ b/drivers/regulator/core.c > @@ -3322,15 +3322,12 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator, > > /* for not coupled regulators this will just set the voltage */ > ret = regulator_balance_voltage(rdev, state); > - if (ret < 0) > - goto out2; > + if (ret < 0) { > + voltage->min_uV = old_min_uV; > + voltage->max_uV = old_max_uV; > + } > > out: > - return 0; > -out2: > - voltage->min_uV = old_min_uV; > - voltage->max_uV = old_max_uV; > - > return ret; > } > >
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
| |