Messages in this thread | | | From | Anson Huang <> | Subject | RE: [PATCH V5 1/5] dt-bindings: pwm: Add i.MX TPM PWM binding | Date | Mon, 18 Mar 2019 09:50:01 +0000 |
| |
Hi, Stefan
Best Regards! Anson Huang
> -----Original Message----- > From: Stefan Agner [mailto:stefan@agner.ch] > Sent: 2019年3月18日 16:19 > To: Anson Huang <anson.huang@nxp.com> > Cc: thierry.reding@gmail.com; robh+dt@kernel.org; mark.rutland@arm.com; > shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de; > festevam@gmail.com; linux@armlinux.org.uk; otavio@ossystems.com.br; > Leonard Crestez <leonard.crestez@nxp.com>; Robin Gong > <yibin.gong@nxp.com>; jan.tuerk@emtrion.com; linux- > pwm@vger.kernel.org; devicetree@vger.kernel.org; linux-arm- > kernel@lists.infradead.org; linux-kernel@vger.kernel.org; u.kleine- > koenig@pengutronix.de; dl-linux-imx <linux-imx@nxp.com> > Subject: Re: [PATCH V5 1/5] dt-bindings: pwm: Add i.MX TPM PWM binding > > On 18.03.2019 08:41, Anson Huang wrote: > > Add i.MX TPM(Low Power Timer/Pulse Width Modulation Module) PWM > binding. > > > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com> > > --- > > No changes. > > --- > > Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt | 19 > > +++++++++++++++++++ > > 1 file changed, 19 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > > > diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > new file mode 100644 > > index 0000000..d47b8fb > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.txt > > @@ -0,0 +1,19 @@ > > +Freescale i.MX TPM PWM controller > > + > > +Required properties: > > +- compatible : Should be "fsl,imx-tpm-pwm". > > +- reg: Physical base address and length of the controller's registers. > > +- #pwm-cells: Should be 2. See pwm.txt in this directory for a > > description of the cells format. > > It seems that the driver supports polarity. Can we use 3 cells so we can > specify the polarity in the device tree? > > Also use 3 cells in the base device tree to enable other boards making use of > the polarity (arch/arm/boot/dts/imx7ulp.dtsi).
It makes sense, I will change it to 3 cells and specify the polarity in backlight node.
Anson.
> > -- > Stefan > > > +- clocks : The clock provided by the SoC to drive the PWM. > > +- interrupts: The interrupt for the pwm controller. > > + > > +Example: > > + > > +pwm0: tpm@40250000 { > > + compatible = "fsl,imx-tpm-pwm"; > > + reg = <0x40250000 0x1000>; > > + assigned-clocks = <&clks IMX7ULP_CLK_LPTPM4>; > > + assigned-clock-parents = <&clks IMX7ULP_CLK_SOSC_BUS_CLK>; > > + clocks = <&clks IMX7ULP_CLK_LPTPM4>; > > + #pwm-cells = <2>; > > +};
| |