lkml.org 
[lkml]   [2019]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 2/3] ARM: dts: stm32: enable Vivante GPU support on stm32mp157c-ed1 board
From
Date
Am Freitag, den 15.02.2019, 16:58 +0100 schrieb Pierre-Yves MORDRET:
> Enable Vivante GPU driver for stm32mp157c-ed1 board.
>
> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
> ---
>  arch/arm/boot/dts/stm32mp157c-ed1.dts | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts
> b/arch/arm/boot/dts/stm32mp157c-ed1.dts
> index 98ef7a0..792f402 100644
> --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
> @@ -20,6 +20,17 @@
>   reg = <0xC0000000 0x40000000>;
>   };
>  
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gpu_reserved: gpu@f8000000 {
> + reg = <0xf8000000 0x8000000>;
> + no-map;
> + };
> + };
> +

I don't think you need this. The GPU driver uses very little contig dma
memory. Most of the GPU memory is ordinary paged memory, so setting
aside a private memory region of this size is a waste of memory. Most
likely you can just allow the GPU driver to use the system global CMA
region.

Regards,
Lucas


>   aliases {
>   serial0 = &uart4;
>   };
> @@ -53,6 +64,11 @@
>   status = "okay";
>  };
>  
> +&gpu {
> + contiguous-area = <&gpu_reserved>;
> + status = "okay";
> +};
> +
>  &i2c4 {
>   pinctrl-names = "default";
>   pinctrl-0 = <&i2c4_pins_a>;

\
 
 \ /
  Last update: 2019-02-15 17:15    [W:1.511 / U:2.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site