lkml.org 
[lkml]   [2019]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 01/10] IMA: Defined an IMA hook to measure keys on key create or update
From
Date
On Thu, 2019-11-07 at 10:42 -0800, Lakshmi Ramasubramanian wrote:
> On 11/6/2019 7:40 PM, Mimi Zohar wrote:
>
> >>> I would move the patch that defines the "keyring=" policy option prior
> >>> to this one.  Include the call to process_buffer_measurement() in this
> >>> patch.  A subsequent patch would add support to defer measuring the
> >>> key, by calling a function named something like
> >>> ima_queue_key_measurement().
> >>>
> >>
> >> As I'd stated in the other response, I wanted to isolate all key related
> >> code in a separate C file and build it if and only if all CONFIG
> >> dependencies are met.
> >
> > The basic measuring of keys shouldn't be any different than any other
> > policy rule, other than it is a key and not a file.  This is the
> > reason that I keep saying start out with the basics and then add
> > support to defer measuring keys on the trusted keyrings.
>
> I'll make the changes, rearrange the patches and send an updated set.
>
> I do have a few questions since I am still not fully understanding the
> requirements you are targeting. Appreciate if you could please clarify.
>
> As you already know, I am using the "public key" of the given asymmetric
> key as the "buffer" to measure in process_buffer_measurement().
>
> The measurement decision is not based on whether the keyring is a
> trusted one or an untrusted one. As long as the IMA policy allows
> (through the "keyrings=" option) the key will be measured.

We should be able to measure all keys being loaded onto any keyring or
onto a specific "keyring=".   This shouldn't be any different than any
other policy rule.  Once you have this basic feature working, you
would address loading keys during early boot.

>
> Do you want only trusted keyrings to be allowed in the measurement?
> In my opinion, that decision should be deferred to whoever is setting up
> the IMA policy.

Right, but it shouldn't be limited to just "trusted" keyrings.  This
way you can first test loading keys onto any keyring.

>
> > Only the queueing code needed for measuring keys on the trusted
> > keyrings would be in a separate file.
> >
>
> The decision to process key immediately or defer (queue) is based on
> whether IMA has been initialized or not. Keyring is not used for this
> decision.
>
> Could you please clarify how queuing is related to keyring's
> trustworthiness?
>
> The check for whether the key is an asymmetric one or not, and
> extracting the "public key" if it is an asymmetric key needs to be in a
> separate file to handle the CONFIG dependencies in IMA.

Queuing the keys should be independent of measuring the keys.
 Initially you would start with just measuring the key.  From a high
level it would look like:

ima_post_key_create_or_update(...)
{
   "measure key based on
policy(key, keyring, ...)"
}

This requires the IMA "keyring=" policy option support be defined
first.

Subsequently you would add key queuing support, and then update
ima_post_key_create_or_update().  It would look like:

ima_post_key_create_or_update(...)
{
if (custom policy is loaded)
   "measure key based on policy(key, keyring, ...)"
else
"queue key(key, keyring)"
}

Mimi

\
 
 \ /
  Last update: 2019-11-07 21:54    [W:2.175 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site