lkml.org 
[lkml]   [2018]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] i2c: xlp9xx: Fix case where SSIF read transaction completes early
On Wed, Aug 08, 2018 at 11:36:48PM -0700, George Cherian wrote:
> During ipmi stress tests we see occasional failure of transactions
> at the boot time. This happens in the case of a I2C_M_RECV_LEN
> transactions, when the read transfer completes (with the initial
> read length of 34) before the driver gets a chance to handle interrupts.
>
> The current driver code expects at least 2 interrupts for I2C_M_RECV_LEN
> transactions. The length is updated during the first interrupt, and the
> buffer contents are only copied during subsequent interrupts. In case of
> just one interrupt, we will complete the transaction without copying
> out the bytes from RX fifo.
>
> Update the code to drain the RX fifo after the length update,
> so that the transaction completes correctly in all cases.
>
> Signed-off-by: George Cherian <george.cherian@cavium.com>

Applied to for-current, thanks!

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-08-09 17:40    [W:0.021 / U:2.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site