Messages in this thread | | | Subject | Re: aacraid: Regression in 4.14.56 with *genirq/affinity: assign vectors to all possible CPUs* | From | Paul Menzel <> | Date | Sat, 11 Aug 2018 10:14:18 +0200 |
| |
Dear Greg,
Am 10.08.2018 um 17:55 schrieb Greg Kroah-Hartman: > On Fri, Aug 10, 2018 at 04:11:23PM +0200, Paul Menzel wrote:
>> On 08/10/18 15:36, Greg Kroah-Hartman wrote: >>> On Fri, Aug 10, 2018 at 03:21:52PM +0200, Paul Menzel wrote: >>>> Dear Greg, >>>> >>>> >>>> Commit ef86f3a7 (genirq/affinity: assign vectors to all possible CPUs) added >>>> for Linux 4.14.56 causes the aacraid module to not detect the attached devices >>>> anymore on a Dell PowerEdge R720 with two six core 24x E5-2630 @ 2.30GHz. >>>> >>>> ``` >>>> $ dmesg | grep raid >>>> [ 0.269768] raid6: sse2x1 gen() 7179 MB/s >>>> [ 0.290069] raid6: sse2x1 xor() 5636 MB/s >>>> [ 0.311068] raid6: sse2x2 gen() 9160 MB/s >>>> [ 0.332076] raid6: sse2x2 xor() 6375 MB/s >>>> [ 0.353075] raid6: sse2x4 gen() 11164 MB/s >>>> [ 0.374064] raid6: sse2x4 xor() 7429 MB/s >>>> [ 0.379001] raid6: using algorithm sse2x4 gen() 11164 MB/s >>>> [ 0.386001] raid6: .... xor() 7429 MB/s, rmw enabled >>>> [ 0.391008] raid6: using ssse3x2 recovery algorithm >>>> [ 3.559682] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) >>>> [ 3.570061] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) >>>> [ 10.725767] Adaptec aacraid driver 1.2.1[50834]-custom >>>> [ 10.731724] aacraid 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control >>>> [ 10.743295] aacraid: Comm Interface type3 enabled >>>> $ lspci -nn | grep Adaptec >>>> 04:00.0 Serial Attached SCSI controller [0107]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01) >>>> 42:00.0 Serial Attached SCSI controller [0107]: Adaptec Smart Storage PQI 12G SAS/PCIe 3 [9005:028f] (rev 01) >>>> ``` >>>> >>>> But, it still works with a Dell PowerEdge R715 with two eight core AMD >>>> Opteron 6136, the card below. >>>> >>>> ``` >>>> $ lspci -nn | grep Adaptec >>>> 22:00.0 Serial Attached SCSI controller [0107]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01) >>>> ``` >>>> >>>> Reverting the commit fixes the issue. >>>> >>>> commit ef86f3a72adb8a7931f67335560740a7ad696d1d >>>> Author: Christoph Hellwig <hch@lst.de> >>>> Date: Fri Jan 12 10:53:05 2018 +0800 >>>> >>>> genirq/affinity: assign vectors to all possible CPUs >>>> >>>> commit 84676c1f21e8ff54befe985f4f14dc1edc10046b upstream. >>>> >>>> Currently we assign managed interrupt vectors to all present CPUs. This >>>> works fine for systems were we only online/offline CPUs. But in case of >>>> systems that support physical CPU hotplug (or the virtualized version of >>>> it) this means the additional CPUs covered for in the ACPI tables or on >>>> the command line are not catered for. To fix this we'd either need to >>>> introduce new hotplug CPU states just for this case, or we can start >>>> assining vectors to possible but not present CPUs. >>>> >>>> Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> >>>> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> >>>> Tested-by: Stefan Haberland <sth@linux.vnet.ibm.com> >>>> Fixes: 4b855ad37194 ("blk-mq: Create hctx for each present CPU") >>>> Cc: linux-kernel@vger.kernel.org >>>> Cc: Thomas Gleixner <tglx@linutronix.de> >>>> Signed-off-by: Christoph Hellwig <hch@lst.de> >>>> Signed-off-by: Jens Axboe <axboe@kernel.dk> >>>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> >>>> >>>> The problem doesn’t happen with Linux 4.17.11, so there are commits in >>>> Linux master fixing this. Unfortunately, my attempts to find out failed. >>>> >>>> I was able to cherry-pick the three commits below on top of 4.14.62, >>>> but the problem persists. >>>> >>>> 6aba81b5a2f5 genirq/affinity: Don't return with empty affinity masks on error >>>> 355d7ecdea35 scsi: hpsa: fix selection of reply queue >>>> e944e9615741 scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity >>>> >>>> Trying to cherry-pick the commits below, referencing the commit >>>> in question, gave conflicts. >>>> >>>> 1. adbe552349f2 scsi: megaraid_sas: fix selection of reply queue >>>> 2. d3056812e7df genirq/affinity: Spread irq vectors among present CPUs as far as possible >>>> >>>> To avoid further trial and error with the server with a slow firmware, >>>> do you know what commits should fix the issue? >>> >>> Look at the email on the stable mailing list: >>> Subject: Re: Fix for 84676c1f (b5b6e8c8) missing in 4.14.y >>> it should help you out here. >> >> Ah, I didn’t see that [1] yet. Also I can’t find the original message, and a >> way to reply to that thread. Therefore, here is my reply. >> >>> Can you try the patches listed there? >> >> I tried some of these already without success. >> >> b5b6e8c8d3b4 scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity >> 2f31115e940c scsi: core: introduce force_blk_mq >> adbe552349f2 scsi: megaraid_sas: fix selection of reply queue >> >> The commit above is already in v4.14.56. >> >> 8b834bff1b73 scsi: hpsa: fix selection of reply queue >> >> The problem persists. >> >> The problem also persists with the state below. >> >> 3528f73a4e5d scsi: core: introduce force_blk_mq >> 16dc4d8215f3 scsi: hpsa: fix selection of reply queue >> f0a7ab12232d scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity >> 6aba81b5a2f5 genirq/affinity: Don't return with empty affinity masks on error >> 1aa1166eface (tag: v4.14.62, stable/linux-4.14.y) Linux 4.14.62 >> >> So, some more commits are necessary. > > Or I revert the original patch here, and the follow-on ones that were > added to "fix" this issue. I think that might be the better thing > overall here, right? Have you tried that?
Yes, reverting the commit fixed the issue for us. If Christoph or Ming do not have another suggestion for a commit, that would be the way to go.
Kind regards,
Paul
| |