lkml.org 
[lkml]   [2018]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 2/4] drivers: soc: Add support to register LLCC EDAC driver
On 2018-08-10 10:21, Evan Green wrote:
> On Wed, Aug 1, 2018 at 1:33 PM Venkata Narendra Kumar Gutta
> <vnkgutta@codeaurora.org> wrote:
>>
>> Cache error reporting controller is to detect and report single
>> and double bit errors on Last Level Cache Controller (LLCC) cache.
>> Add required support to register LLCC EDAC driver as platform driver,
>> from LLCC driver.
>>
>> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
>> ---
>> drivers/soc/qcom/llcc-slice.c | 18 ++++++++++++++++--
>> include/linux/soc/qcom/llcc-qcom.h | 2 ++
>> 2 files changed, 18 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/soc/qcom/llcc-slice.c
>> b/drivers/soc/qcom/llcc-slice.c
>> index a63640d..09c8bb0 100644
>> --- a/drivers/soc/qcom/llcc-slice.c
>> +++ b/drivers/soc/qcom/llcc-slice.c
>> @@ -224,7 +224,7 @@ static int qcom_llcc_cfg_program(struct
>> platform_device *pdev)
>> u32 attr0_val;
>> u32 max_cap_cacheline;
>> u32 sz;
>> - int ret;
>> + int ret = 0;
>> const struct llcc_slice_config *llcc_table;
>> struct llcc_slice_desc desc;
>>
>> @@ -282,6 +282,7 @@ int qcom_llcc_probe(struct platform_device *pdev,
>> struct resource *llcc_banks_res, *llcc_bcast_res;
>> void __iomem *llcc_banks_base, *llcc_bcast_base;
>> int ret, i;
>> + struct platform_device *llcc_edac;
>>
>> drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
>> if (!drv_data)
>> @@ -341,6 +342,19 @@ int qcom_llcc_probe(struct platform_device *pdev,
>> mutex_init(&drv_data->lock);
>> platform_set_drvdata(pdev, drv_data);
>>
>> - return qcom_llcc_cfg_program(pdev);
>> + ret = qcom_llcc_cfg_program(pdev);
>> + if (ret)
>> + return ret;
>> +
>> + drv_data->ecc_irq = platform_get_irq(pdev, 0);
>> + if (drv_data->ecc_irq >= 0) {
>
> This condition will always be true for u32. See below...
That's true. I missed that.
>
>> + llcc_edac = platform_device_register_data(&pdev->dev,
>> + "qcom_llcc_edac", -1,
>> drv_data,
>> + sizeof(*drv_data));
>> + if (IS_ERR(llcc_edac))
>> + dev_err(dev, "Failed to register llcc edac
>> driver\n");
>> + }
>> +
>> + return ret;
>> }
>> EXPORT_SYMBOL_GPL(qcom_llcc_probe);
>> diff --git a/include/linux/soc/qcom/llcc-qcom.h
>> b/include/linux/soc/qcom/llcc-qcom.h
>> index c681e79..1a3bc25 100644
>> --- a/include/linux/soc/qcom/llcc-qcom.h
>> +++ b/include/linux/soc/qcom/llcc-qcom.h
>> @@ -78,6 +78,7 @@ struct llcc_slice_config {
>> * @num_banks: Number of llcc banks
>> * @bitmap: Bit map to track the active slice ids
>> * @offsets: Pointer to the bank offsets array
>> + * @ecc_irq: interrupt for llcc cache error detection and reporting
>> */
>> struct llcc_drv_data {
>> struct regmap *regmap;
>> @@ -89,6 +90,7 @@ struct llcc_drv_data {
>> u32 num_banks;
>> unsigned long *bitmap;
>> u32 *offsets;
>> + u32 ecc_irq;
>
> The return type for platform_get_irq is int, so this should probably
> be int, or "unsigned", but then you'd need to fix your logic above.
I think we should keep that as int. I'll check on which one I'm supposed
to use here and update in the next version.
>
>> };
>>
>> #if IS_ENABLED(CONFIG_QCOM_LLCC)
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
>> Forum,
>> a Linux Foundation Collaborative Project
>>

\
 
 \ /
  Last update: 2018-08-11 01:05    [W:0.100 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site