lkml.org 
[lkml]   [2018]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 7/9] phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC
On Mon, Jul 9, 2018 at 12:31 PM, Kishon Vijay Abraham I <kishon@ti.com> wrote:
> Hi,
>
> On Friday 06 July 2018 09:08 PM, Icenowy Zheng wrote:
>> Allwinner H6 SoC contains a USB3 PHY (with USB2 DP/DM lines also
>> controlled).
>>
>> Add a driver for it.
>>
>> The register operations in this driver is mainly extracted from the BSP
>> USB3 driver.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>> ---
>> Changes in v2:
>> - Splitted out the DT binding.
>>
>> drivers/phy/allwinner/Kconfig | 13 ++
>> drivers/phy/allwinner/Makefile | 1 +
>> drivers/phy/allwinner/phy-sun50i-usb3.c | 194 ++++++++++++++++++++++++
>> 3 files changed, 208 insertions(+)
>> create mode 100644 drivers/phy/allwinner/phy-sun50i-usb3.c
>>
>> diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
>> index cdc1e745ba47..cf373bcee034 100644
>> --- a/drivers/phy/allwinner/Kconfig
>> +++ b/drivers/phy/allwinner/Kconfig
>> @@ -29,3 +29,16 @@ config PHY_SUN9I_USB
>> sun9i SoCs.
>>
>> This driver controls each individual USB 2 host PHY.
>> +
>> +config PHY_SUN50I_USB3
>> + tristate "Allwinner sun50i SoC USB3 PHY driver"
>> + depends on ARCH_SUNXI && HAS_IOMEM && OF
>> + depends on RESET_CONTROLLER
>> + depends on USB_SUPPORT
>> + select USB_COMMON
>
> Doesn't look like this driver depends on USB_SUPPORT.
>> + select GENERIC_PHY
>> + help
>> + Enable this to support the USB3.0-capable transceiver that is
>> + part of some Allwinner sun50i SoCs.
>> +
>> + This driver controls each individual USB 2+3 host PHY combo.
>> diff --git a/drivers/phy/allwinner/Makefile b/drivers/phy/allwinner/Makefile
>> index 8605529c01a1..a8d01e9073c2 100644
>> --- a/drivers/phy/allwinner/Makefile
>> +++ b/drivers/phy/allwinner/Makefile
>> @@ -1,2 +1,3 @@
>> obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
>> obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
>> +obj-$(CONFIG_PHY_SUN50I_USB3) += phy-sun50i-usb3.o
>> diff --git a/drivers/phy/allwinner/phy-sun50i-usb3.c b/drivers/phy/allwinner/phy-sun50i-usb3.c
>> new file mode 100644
>> index 000000000000..226c99c2d664
>> --- /dev/null
>> +++ b/drivers/phy/allwinner/phy-sun50i-usb3.c
>> @@ -0,0 +1,194 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Allwinner sun50i(H6) USB 3.0 phy driver
>> + *
>> + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
>> + *
>> + * Based on phy-sun9i-usb.c, which is:
>> + *
>> + * Copyright (C) 2014-2015 Chen-Yu Tsai <wens@csie.org>
>> + *
>> + * Based on code from Allwinner BSP, which is:
>> + *
>> + * Copyright (c) 2010-2015 Allwinner Technology Co., Ltd.
>
> Does the BSP also use GPL license?

Yes they released it under the GPL license. It's still available here:

https://github.com/allwinner-zh/linux-3.4-sunxi

But is now unmaintained.

ChenYu


>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/usb/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/reset.h>
>> +
>> +/* Interface Status and Control Registers */
>> +#define SUNXI_ISCR 0x00
>> +#define SUNXI_PIPE_CLOCK_CONTROL 0x14
>> +#define SUNXI_PHY_TUNE_LOW 0x18
>> +#define SUNXI_PHY_TUNE_HIGH 0x1c
>> +#define SUNXI_PHY_EXTERNAL_CONTROL 0x20
>> +
>> +/* USB2.0 Interface Status and Control Register */
>> +#define SUNXI_ISCR_FORCE_VBUS (3 << 12)
>> +
>> +/* PIPE Clock Control Register */
>> +#define SUNXI_PCC_PIPE_CLK_OPEN (1 << 6)
>> +
>> +/* PHY External Control Register */
>> +#define SUNXI_PEC_EXTERN_VBUS (3 << 1)
>> +#define SUNXI_PEC_SSC_EN (1 << 24)
>> +#define SUNXI_PEC_REF_SSP_EN (1 << 26)
>> +
>> +/* PHY Tune High Register */
>> +#define SUNXI_TX_DEEMPH_3P5DB(n) ((n) << 19)
>> +#define SUNXI_TX_DEEMPH_3P5DB_MASK GENMASK(24, 19)
>> +#define SUNXI_TX_DEEMPH_6DB(n) ((n) << 13)
>> +#define SUNXI_TX_DEEMPH_6GB_MASK GENMASK(18, 13)
>> +#define SUNXI_TX_SWING_FULL(n) ((n) << 6)
>> +#define SUNXI_TX_SWING_FULL_MASK GENMASK(12, 6)
>> +#define SUNXI_LOS_BIAS(n) ((n) << 3)
>> +#define SUNXI_LOS_BIAS_MASK GENMASK(5, 3)
>> +#define SUNXI_TXVBOOSTLVL(n) ((n) << 0)
>> +#define SUNXI_TXVBOOSTLVL_MASK GENMASK(0, 2)
>> +
>> +struct sun50i_usb3_phy {
>> + struct phy *phy;
>> + void __iomem *regs;
>> + struct reset_control *reset;
>> + struct clk *clk;
>> +};
>> +
>> +static void sun50i_usb3_phy_open(struct sun50i_usb3_phy *phy)
>> +{
>> + u32 val;
>> +
>> + val = readl(phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
>> + val |= SUNXI_PEC_EXTERN_VBUS;
>> + val |= SUNXI_PEC_SSC_EN | SUNXI_PEC_REF_SSP_EN;
>> + writel(val, phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
>> +
>> + val = readl(phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
>> + val |= SUNXI_PCC_PIPE_CLK_OPEN;
>> + writel(val, phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
>> +
>> + val = readl(phy->regs + SUNXI_ISCR);
>> + val |= SUNXI_ISCR_FORCE_VBUS;
>> + writel(val, phy->regs + SUNXI_ISCR);
>> +
>> + /*
>> + * All the magic numbers written to the PHY_TUNE_{LOW_HIGH}
>> + * registers are directly taken from the BSP USB3 driver from
>> + * Allwiner.
>
> %s/Allwiner/Allwinner/
>> + */
>> + writel(0x0047fc87, phy->regs + SUNXI_PHY_TUNE_LOW);
>
> PHY_TUNE_LOW should also configure individual parameters like how you've done
> below for PHY_TUNE_HIGH.
>
> Thanks
> Kishon

\
 
 \ /
  Last update: 2018-07-09 06:37    [W:0.041 / U:4.248 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site