lkml.org 
[lkml]   [2018]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] i2c: tegra: Fix NACK error handling
On Tue, Jul 03, 2018 at 09:55:43AM +0100, Jon Hunter wrote:
> On Tegra30 Cardhu the PCA9546 I2C mux is not ACK'ing I2C commands on
> resume from suspend (which is caused by the reset signal for the I2C
> mux not being configured correctl). However, this NACK is causing the
> Tegra30 to hang on resuming from suspend which is not expected as we
> detect NACKs and handle them. The hang observed appears to occur when
> resetting the I2C controller to recover from the NACK.
>
> Commit 77821b4678f9 ("i2c: tegra: proper handling of error cases") added
> additional error handling for some error cases including NACK, however,
> it appears that this change conflicts with an early fix by commit
> f70893d08338 ("i2c: tegra: Add delay before resetting the controller
> after NACK"). After commit 77821b4678f9 was made we now disable 'packet
> mode' before the delay from commit f70893d08338 happens. Testing shows
> that moving the delay to before disabling 'packet mode' fixes the hang
> observed on Tegra30. The delay was added to give the I2C controller
> chance to send a stop condition and so it makes sense to move this to
> before we disable packet mode. Please note that packet mode is always
> enabled for Tegra.
>
> Fixes: 77821b4678f9 ("i2c: tegra: proper handling of error cases")
>
> Cc: stable@vger.kernel.org
>
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> ---
> drivers/i2c/busses/i2c-tegra.c | 17 ++++++++---------
> 1 file changed, 8 insertions(+), 9 deletions(-)

Seems sensible:

Acked-by: Thierry Reding <treding@nvidia.com>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-07-09 16:03    [W:0.032 / U:2.960 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site