lkml.org 
[lkml]   [2018]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH v2 0/9] Allwinner H6 USB support
On Fri, Jul 6, 2018 at 11:37 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
> This patchset introduces support for the USB ports (both USB2 and USB3)
> on the Allwinner H6 SoC.
>
> This revision adds the USB2 support, and places it before the USB3
> support. So only the USB3 part will have changelog in this revision.
>
> The first 5 PATCHes are the USB2 part, and the latter 4 PATCHes are the
> USB3 part.
>
> PATCH 1, 2, 6, 7 should go through the PHY tree, and the remaining
> patches should go through the armsoc tree via sunxi tree.
>
> Icenowy Zheng (9):
> phy: sun4i-usb: add support for missing USB PHY index
> phy: sun4i-usb: add support for H6 USB2 PHY
> arm64: allwinner: dts: h6: add USB2-related device nodes
> arm64: allwinner: dts: h6: add USB Vbus regulator
> arm64: allwinner: dts: h6: enable USB2 on Pine H64
> dt-bindings: phy: add binding for Allwinner USB3 PHY
> phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC
> arm64: allwinner: dts: h6: add USB3 device nodes
> arm64: allwinner: dts: h6: enable USB3 port on Pine H64

Apart from my comments in a few patches, this series is

Reviewed-by: Chen-Yu Tsai <wens@csie.org>

\
 
 \ /
  Last update: 2018-07-09 04:52    [W:0.151 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site