lkml.org 
[lkml]   [2018]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] ARC: Configure APB GPIO controller on ARC HSDK platform
Date
Hi Gustavo,

On Fri, 2018-07-06 at 11:32 +0100, Gustavo Pimentel wrote:
> In case of HSDK we have intermediate INTC in for of DW APB GPIO controller
> which is used as a de-bounce logic for interrupt wires that come from
> outside the board.
>
> We cannot use existing "irq-dw-apb-ictl" driver here because all input
> lines are routed to corresponding output lines but not muxed into one
> line (this is configured in RTL and we cannot change this in software).
>
> But even if we add such a feature to "irq-dw-apb-ictl" driver that won't
> benefit us as higher-level INTC (in case of HSDK it is IDU) anyways has
> per-input control so adding fully-controller intermediate INTC will only
> bring some overhead on interrupt processing but no other benefits.
>
> Thus we just do one-time configuration of DW APB GPIO controller and
> forget about it.
>
> Based on implementation available on arch/arc/plat-axs10x/axs10x.c file.
>
> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
\
 
 \ /
  Last update: 2018-07-06 18:36    [W:0.037 / U:0.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site