lkml.org 
[lkml]   [2018]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips
On 3 July 2018 at 13:15, Laurentiu Tudor <laurentiu.tudor@nxp.com> wrote:
> Hi Uffe,
>
> On 02.07.2018 17:37, Ulf Hansson wrote:
>> On 28 June 2018 at 10:45, Laurentiu Tudor <laurentiu.tudor@nxp.com> wrote:
>>> SDHCI controller in ls1043a and ls1046a generate 40-bit wide addresses
>>> when doing DMA. Make sure that the corresponding dma mask is correctly
>>> configured.
>>>
>>> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
>>
>> Thanks, applied for next!
>
> Thanks for picking this up!
> I just realized that maybe I should have provided some context around
> this patch. I'm working on enabling smmu on these chips and encountered
> the following problem: the smmu input address size is 48 bits so the dma
> mappings for sdhci end up 48-bit wide. However, on these chips sdhci
> only use 40-bits of that address size when doing dma.
> So you end up with a 48-bit address translation in smmu but the device
> generates transactions with clipped 40-bit addresses, thus smmu context
> faults are triggered. Setting up the correct dma mask fixes this situation.

That's perfect data for the changelog. Care to send a v2, then I
re-place the one I have just applied!

Kind regards
Uffe

>
> ---
> Best Regards, Laurentiu
>
>>
>>> ---
>>> drivers/mmc/host/sdhci-of-esdhc.c | 6 ++++++
>>> 1 file changed, 6 insertions(+)
>>>
>>> diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
>>> index 4ffa6b173a21..8332f56e6c0d 100644
>>> --- a/drivers/mmc/host/sdhci-of-esdhc.c
>>> +++ b/drivers/mmc/host/sdhci-of-esdhc.c
>>> @@ -22,6 +22,7 @@
>>> #include <linux/sys_soc.h>
>>> #include <linux/clk.h>
>>> #include <linux/ktime.h>
>>> +#include <linux/dma-mapping.h>
>>> #include <linux/mmc/host.h>
>>> #include "sdhci-pltfm.h"
>>> #include "sdhci-esdhc.h"
>>> @@ -427,6 +428,11 @@ static void esdhc_of_adma_workaround(struct sdhci_host *host, u32 intmask)
>>> static int esdhc_of_enable_dma(struct sdhci_host *host)
>>> {
>>> u32 value;
>>> + struct device *dev = mmc_dev(host->mmc);
>>> +
>>> + if (of_device_is_compatible(dev->of_node, "fsl,ls1043a-esdhc") ||
>>> + of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc"))
>>> + dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
>>>
>>> value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
>>> value |= ESDHC_DMA_SNOOP;
>>> --
>>> 2.17.1
>>>

\
 
 \ /
  Last update: 2018-07-04 12:56    [W:0.090 / U:1.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site