lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH linux-next v6 04/13] dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
From
Date
Hi Rob,

Thanks a lot for the review. Please check my inline answer.

On 7/3/2018 9:51 AM, Rob Herring wrote:
> On Thu, Jun 21, 2018 at 12:40:24PM -0700, Jae Hyun Yoo wrote:
>> This commit adds a dt-bindings document of PECI adapter driver for ASPEED
>> AST24xx/25xx SoCs.
>>
>> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
>> Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
>> Reviewed-by: James Feist <james.feist@linux.intel.com>
>> Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
>> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>> Cc: Greg KH <gregkh@linuxfoundation.org>
>> Cc: Jason M Biils <jason.m.bills@linux.intel.com>
>> Cc: Milton Miller II <miltonm@us.ibm.com>
>> Cc: Pavel Machek <pavel@ucw.cz>
>> Cc: Robin Murphy <robin.murphy@arm.com>
>> Cc: Ryan Chen <ryan_chen@aspeedtech.com>
>> ---
>> .../devicetree/bindings/peci/peci-aspeed.txt | 57 +++++++++++++++++++
>> 1 file changed, 57 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.txt
>>
>> diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.txt b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
>> new file mode 100644
>> index 000000000000..8c35f905589d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
>> @@ -0,0 +1,57 @@
>> +Device tree configuration for PECI buses on the AST24XX and AST25XX SoCs.
>> +
>> +Required properties:
>> +- compatible : Should be "aspeed,ast2400-peci" or "aspeed,ast2500-peci"
>> + - aspeed,ast2400-peci: ASPEED AST2400 family PECI
>> + controller
>> + - aspeed,ast2500-peci: ASPEED AST2500 family PECI
>> + controller
>
> Just this is sufficient:
>
> Should be one of:
> "aspeed,ast2400-peci"
> "aspeed,ast2500-peci"
>
> With that,
>
> Reviewed-by: Rob Herring <robh@kernel.org>
>

Thanks! I'll change it as you commented out.

Jae

>> +- reg : Should contain PECI controller registers location and
>> + length.
>> +- #address-cells : Should be <1> required to define a client address.
>> +- #size-cells : Should be <0> required to define a client address.
>> +- interrupts : Should contain PECI controller interrupt.
>> +- clocks : Should contain clock source for PECI controller. Should
>> + reference the external oscillator clock in the second
>> + cell.
>> +- resets : Should contain phandle to reset controller with the reset
>> + number in the second cell.
>> +- clock-frequency : Should contain the operation frequency of PECI controller
>> + in units of Hz.
>> + 187500 ~ 24000000
>> +
>> +Optional properties:
>> +- msg-timing : Message timing negotiation period. This value will
>> + determine the period of message timing negotiation to be
>> + issued by PECI controller. The unit of the programmed
>> + value is four times of PECI clock period.
>> + 0 ~ 255 (default: 1)
>> +- addr-timing : Address timing negotiation period. This value will
>> + determine the period of address timing negotiation to be
>> + issued by PECI controller. The unit of the programmed
>> + value is four times of PECI clock period.
>> + 0 ~ 255 (default: 1)
>> +- rd-sampling-point : Read sampling point selection. The whole period of a bit
>> + time will be divided into 16 time frames. This value will
>> + determine the time frame in which the controller will
>> + sample PECI signal for data read back. Usually in the
>> + middle of a bit time is the best.
>> + 0 ~ 15 (default: 8)
>> +- cmd-timeout-ms : Command timeout in units of ms.
>> + 1 ~ 60000 (default: 1000)
>> +
>> +Example:
>> + peci0: peci-bus@0 {
>> + compatible = "aspeed,ast2500-peci";
>> + reg = <0x0 0x60>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <15>;
>> + clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
>> + resets = <&syscon ASPEED_RESET_PECI>;
>> + clock-frequency = <24000000>;
>> + msg-timing = <1>;
>> + addr-timing = <1>;
>> + rd-sampling-point = <8>;
>> + cmd-timeout-ms = <1000>;
>> + };
>> --
>> 2.17.1
>>

\
 
 \ /
  Last update: 2018-07-03 19:03    [W:0.059 / U:1.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site