lkml.org 
[lkml]   [2018]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] dt-bindings: iio: adc: add bindings for mcp3911
On Sat, 21 Jul 2018 21:59:22 +0200
Marcus Folkesson <marcus.folkesson@gmail.com> wrote:

> MCP3911 is a dual channel Analog Front End (AFE) containing two
> synchronous sampling delta-sigma Analog-to-Digital Converters (ADC).
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> Signed-off-by: Kent Gustavsson <kent@minoris.se>
> ---
> .../devicetree/bindings/iio/adc/mcp3911.txt | 33 ++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/mcp3911.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> new file mode 100644
> index 000000000000..e233ee94ad96
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> @@ -0,0 +1,33 @@
> +* Microchip MCP3911 Dual channel analog front end (ADC)
> +
> +Required properties:
> + - compatible: Should be "microchip,mcp3911"
> + - reg: SPI chip select number for the device
> +
> +Recommended properties:
> + - spi-max-frequency: Definition as per
> + Documentation/devicetree/bindings/spi/spi-bus.txt.
> + Max frequency for this chip is 20MHz.
> +
> +Optional properties:
> + - device-addr: Device address when multiple MCP3911 chips are present on the
> + same SPI bus. Valid values are 0-3. Defaults to 0.
> + - external-clock: Use external clock instead of crystal oscillator.
As mentioned, in the code, can we use the standard fixed clock bindings here.
We don't actually care what the value is, but it might be nice to be able to
power down the clock if we are suspending or something..

> + - external-vref: Use external voltage reference
> + - vref-supply: Phandle to the external reference voltage supply. (only valid in combination with `external-vref`)

Just use the optional regulator stuff and get rid of the bool.

> + - ch0-width: width for channel0. Valid widths are 16 and 24bits.
> + - ch1-width: width for channel1. Valid widths are 16 and 24bits.

As I asked in the code, are these a function of the wiring etc or are
they something we should really be leaving up to userspace (with a sensible
default).

> +
> +
> +Example:
> +adc@0 {
> + compatible = "microchip,mcp3911";
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + device-addr = <0>;
> + ch0-width = <16>;
> + ch1-width = <24>;
> + external-clock;
> + external-vref;
> + vref-supply = <&vref_reg>;
> +};

\
 
 \ /
  Last update: 2018-07-22 10:12    [W:0.130 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site