lkml.org 
[lkml]   [2018]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/15] MIPS: dts: img: pistachio_marduk: Add user LEDs
Date
Add the LEDs that are connected to the SPI UART bridge.

Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/mips/boot/dts/img/pistachio_marduk.dts | 46 +++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)

diff --git a/arch/mips/boot/dts/img/pistachio_marduk.dts b/arch/mips/boot/dts/img/pistachio_marduk.dts
index f682d0a5a3d9..6984933b3cdc 100644
--- a/arch/mips/boot/dts/img/pistachio_marduk.dts
+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
@@ -60,6 +60,52 @@
};
};

+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "marduk:red:user0";
+ gpios = <&sc16is752 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led1 {
+ label = "marduk:red:user1";
+ gpios = <&sc16is752 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "marduk:red:user2";
+ gpios = <&sc16is752 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "marduk:red:user3";
+ gpios = <&sc16is752 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led4 {
+ label = "marduk:red:user4";
+ gpios = <&sc16is752 4 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led5 {
+ label = "marduk:red:user5";
+ gpios = <&sc16is752 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led6 {
+ label = "marduk:red:user6";
+ gpios = <&sc16is752 6 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
keys {
compatible = "gpio-keys";

--
2.16.4
\
 
 \ /
  Last update: 2018-07-22 23:21    [W:0.131 / U:1.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site