lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 28/33] mtd: rawnand: docg4: convert driver to nand_scan()
On Fri, 20 Jul 2018 09:17:45 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Hi Boris,
>
> Boris Brezillon <boris.brezillon@bootlin.com> wrote on Fri, 20 Jul 2018
> 01:27:32 +0200:
>
> > On Fri, 20 Jul 2018 01:00:21 +0200
> > Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> >
> > > Two helpers have been added to the core to make ECC-related
> > > configuration between the detection phase and the final NAND scan. Use
> > > these hooks and convert the driver to just use nand_scan() instead of
> > > both nand_scan_ident() and nand_scan_tail().
> > >
> > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > > ---
> > > drivers/mtd/nand/raw/docg4.c | 55 ++++++++++++++++++++++++++------------------
> > > 1 file changed, 32 insertions(+), 23 deletions(-)
> > >
> > > diff --git a/drivers/mtd/nand/raw/docg4.c b/drivers/mtd/nand/raw/docg4.c
> > > index 4dccdfba6140..2f6fcd4efab2 100644
> > > --- a/drivers/mtd/nand/raw/docg4.c
> > > +++ b/drivers/mtd/nand/raw/docg4.c
> > > @@ -1227,10 +1227,9 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
> > > * required within a nand driver because they are performed by the nand
> > > * infrastructure code as part of nand_scan(). In this case they need
> > > * to be initialized here because we skip call to nand_scan_ident() (the
> > > - * first half of nand_scan()). The call to nand_scan_ident() is skipped
> > > - * because for this device the chip id is not read in the manner of a
> > > - * standard nand device. Unfortunately, nand_scan_ident() does other
> > > - * things as well, such as call nand_set_defaults().
> > > + * first half of nand_scan()). The call to nand_scan_ident() could be
> > > + * skipped because for this device the chip id is not read in the manner
> > > + * of a standard nand device.
> > > */
> > >
> > > struct nand_chip *nand = mtd_to_nand(mtd);
> > > @@ -1315,6 +1314,27 @@ static int __init read_id_reg(struct mtd_info *mtd)
> > >
> > > static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL };
> > >
> > > +static int docg4_attach_chip(struct nand_chip *chip)
> > > +{
> > > + struct mtd_info *mtd = nand_to_mtd(chip);
> > > + struct docg4_priv *doc = (struct docg4_priv *)(chip + 1);
> > > +
> > > + init_mtd_structs(mtd);
> > > +
> > > + /* Initialize kernel BCH algorithm */
> > > + doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY);
> > > + if (!doc->bch)
> > > + return -EINVAL;
> > > +
> > > + reset(mtd);
> > > +
> > > + return read_id_reg(mtd);
> > > +}
> > > +
> > > +static struct nand_controller_ops docg4_controller_ops = {
> > > + .attach_chip = docg4_attach_chip,
> > > +};
> > > +
> > > static int __init probe_docg4(struct platform_device *pdev)
> > > {
> > > struct mtd_info *mtd;
> > > @@ -1350,26 +1370,16 @@ static int __init probe_docg4(struct platform_device *pdev)
> > > mtd->dev.parent = &pdev->dev;
> > > doc->virtadr = virtadr;
> > > doc->dev = dev;
> > > -
> > > - init_mtd_structs(mtd);
> > > -
> > > - /* initialize kernel bch algorithm */
> > > - doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY);
> > > - if (doc->bch == NULL) {
> > > - retval = -EINVAL;
> > > - goto free_nand;
> > > - }
> > > -
> > > platform_set_drvdata(pdev, doc);
> > >
> > > - reset(mtd);
> > > - retval = read_id_reg(mtd);
> > > - if (retval == -ENODEV) {
> > > - dev_warn(dev, "No diskonchip G4 device found.\n");
> > > - goto free_bch;
> > > - }
> > > -
> > > - retval = nand_scan_tail(mtd);
> > > + /*
> > > + * Asking for 0 chips is useless here but it warns the user that the use
> > > + * of the nand_scan() function is a bit abused here because the
> > > + * initialization is actually a bit specific and re-handled again in the
> > > + * ->attach_chip() hook. It will probably leak some memory though.
> > > + */
> > > + nand->dummy_controller.ops = &docg4_controller_ops;
> > > + retval = nand_scan(mtd, 0);
> > > if (retval)
> > > goto free_bch;
> >
> > Hm, not sure this works. The driver only calls nand_scan_tail(), but
> > you replace that by a call to nand_scan(), which will call both
> > nand_scan_ident() and nand_scan_tail(), and I'm pretty sure
> > nand_scan_ident() will fail here.
>
> I know docg4 is a bit specific and could maybe be moved out of the raw/
> subdirectory. But in the meantime I don't want to block the series for
> this. The better I can propose right now (open to other ideas as
> well) would be to return 0 in nand_scan_ident() if the maxchip parameter
> is 0 which is the case only in this driver AFAIS.

Sounds good. Just document this particular case in nand_scan_ident()
kernel-doc header.

\
 
 \ /
  Last update: 2018-07-20 09:37    [W:0.391 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site