lkml.org 
[lkml]   [2018]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes
    Date
    SDM845 has two tsens blocks, one with 13 sensors and the other with 8
    sensors.

    Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
    ---
    arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
    1 file changed, 16 insertions(+)

    diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
    index cdaabeb..edf8505 100644
    --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
    +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
    @@ -221,6 +221,22 @@
    #interrupt-cells = <2>;
    };

    + tsens0: tsens@c222000 {
    + compatible = "qcom,tsens-v2.4.0", "qcom,tsens-v2";
    + reg = <0xc263000 0x1ff>, /* TM */
    + <0xc222000 0x1ff>; /* SROT */
    + #qcom,sensors = <13>;
    + #thermal-sensor-cells = <1>;
    + };
    +
    + tsens1: tsens@c223000 {
    + compatible = "qcom,tsens-v2.4.0", "qcom,tsens-v2";
    + reg = <0xc265000 0x1ff>, /* TM */
    + <0xc223000 0x1ff>; /* SROT */
    + #qcom,sensors = <8>;
    + #thermal-sensor-cells = <1>;
    + };
    +
    spmi_bus: spmi@c440000 {
    compatible = "qcom,spmi-pmic-arb";
    reg = <0xc440000 0x1100>,
    --
    2.7.4
    \
     
     \ /
      Last update: 2018-07-02 14:46    [W:4.768 / U:0.056 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site