lkml.org 
[lkml]   [2018]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 10/33] mtd: rawnand: jz4780: convert driver to nand_scan()
Date
Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Harvey Hunt <harveyhuntnexus@gmail.com>
---
drivers/mtd/nand/raw/jz4780_nand.c | 34 ++++++++++++++++------------------
1 file changed, 16 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/nand/raw/jz4780_nand.c b/drivers/mtd/nand/raw/jz4780_nand.c
index 49841dad347c..aca4214a6e18 100644
--- a/drivers/mtd/nand/raw/jz4780_nand.c
+++ b/drivers/mtd/nand/raw/jz4780_nand.c
@@ -158,9 +158,8 @@ static int jz4780_nand_ecc_correct(struct mtd_info *mtd, u8 *dat,
return jz4780_bch_correct(nfc->bch, &params, dat, read_ecc);
}

-static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *dev)
+static int jz4780_nand_attach_chip(struct nand_chip *chip)
{
- struct nand_chip *chip = &nand->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
int eccbytes;
@@ -171,7 +170,8 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
switch (chip->ecc.mode) {
case NAND_ECC_HW:
if (!nfc->bch) {
- dev_err(dev, "HW BCH selected, but BCH controller not found\n");
+ dev_err(nfc->dev,
+ "HW BCH selected, but BCH controller not found\n");
return -ENODEV;
}

@@ -180,15 +180,16 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
chip->ecc.correct = jz4780_nand_ecc_correct;
/* fall through */
case NAND_ECC_SOFT:
- dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
- (nfc->bch) ? "hardware BCH" : "software ECC",
- chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
+ dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
+ (nfc->bch) ? "hardware BCH" : "software ECC",
+ chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
break;
case NAND_ECC_NONE:
- dev_info(dev, "not using ECC\n");
+ dev_info(nfc->dev, "not using ECC\n");
break;
default:
- dev_err(dev, "ECC mode %d not supported\n", chip->ecc.mode);
+ dev_err(nfc->dev, "ECC mode %d not supported\n",
+ chip->ecc.mode);
return -EINVAL;
}

@@ -200,7 +201,7 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;

if (eccbytes > mtd->oobsize - 2) {
- dev_err(dev,
+ dev_err(nfc->dev,
"invalid ECC config: required %d ECC bytes, but only %d are available",
eccbytes, mtd->oobsize - 2);
return -EINVAL;
@@ -211,6 +212,10 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
return 0;
}

+static struct nand_controller_ops jz4780_nand_controller_ops = {
+ .attach_chip = jz4780_nand_attach_chip,
+};
+
static int jz4780_nand_init_chip(struct platform_device *pdev,
struct jz4780_nand_controller *nfc,
struct device_node *np,
@@ -280,15 +285,8 @@ static int jz4780_nand_init_chip(struct platform_device *pdev,
chip->controller = &nfc->controller;
nand_set_flash_node(chip, np);

- ret = nand_scan_ident(mtd, 1, NULL);
- if (ret)
- return ret;
-
- ret = jz4780_nand_init_ecc(nand, dev);
- if (ret)
- return ret;
-
- ret = nand_scan_tail(mtd);
+ chip->controller->ops = &jz4780_nand_controller_ops;
+ ret = nand_scan(mtd, 1);
if (ret)
return ret;

--
2.14.1
\
 
 \ /
  Last update: 2018-07-20 01:03    [W:0.174 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site