lkml.org 
[lkml]   [2018]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 00/33] Allow dynamic allocations during NAND chip identification phase
Date
Hello,

This series make a quite deep change in the NAND framework. Until now,
the NAND chip identification phase could be done in two manners from the
controller driver perspective:

1/ Call nand_scan()

or

1/ Call nand_scan_ident()
2/ Do some controller-dependent configuration
3/ Call nand_scan_tail().

The fact that the identifaction could be split in two operations
involved that in the NAND framework, it was not possible to do any
dynamic allocation without risking a memory leak. What if the core
allocates a structure, then the driver between nand_scan_ident() and
nand_scan_tail() decides it cannot handle the chip and errors out?
The structure allocated by the core is lost: it is a memory leak. One
solution could have been to add a nand_scan_ident_cleanup() function,
but that would mean patching all the drivers anyway to make them call
this function when something fails between nand_scan_ident() and
nand_scan_tail().

To avoid this situation, we migrate all drivers to use nand_scan() in
conjuction with the recently added hooks ->attach_chip() and
->detach_chip() that are part of the nand_controller structure
operations. Drivers that need to tweak their configuration after
nand_scan_ident() should implement it. Any dynamically allocated space
in ->attach_chip() must be freed in the second hook: ->detach_chip().

The ->detach_chip() does not have to be called upon error in the
controller driver probe function. The nand_cleanup() helper already
exists for that and will do the call if needed. Of course, this helper
must be called on error after a successful nand_scan(), just like
before.

Once all drivers not using nand_scan() are migrated, nand_scan_ident()
and nand_scan_tail() are unexported and only available internally.

A previous work [1] removed the ONFI/JEDEC parameter pages and instead
allocated a nand_parameters structure in nand_chip, embedding both
generic entries and ONFI-related ones. The deal was, once dynamic
allocation possible, allocate in nand_scan_ident() the ONFI strcuture
only if actually needed. This is done in the last patches.

This series applies on top of nand/next.

Thank you,
Miquèl

[1] http://lists.infradead.org/pipermail/linux-mtd/2018-March/079456.html

Changes since v2:
=================
* Rebased on top of nand/next.
* Adapted all drivers to declare statically a nand_controller_ops
structure and assign it in the probe().
* Added the migration of the tegra_nand.c driver.
* Moved brcmnand controller ops affectation in the probe().

Changes since v1:
=================
* Rebased on top of nand/next.
* Light rewording of the cover letter about the possibility to have a
nand_scan_ident_cleanup() function (just as example of how this series
could have been done differently).
* Changed the hooks to reside in the nand_hw_ctrl structure instead of
being part of nand_ecc_ctrl as these hooks are more
controller-related.


Miquel Raynal (33):
mtd: rawnand: brcmnand: convert driver to nand_scan()
mtd: rawnand: cafe: convert driver to nand_scan()
mtd: rawnand: davinci: convert driver to nand_scan()
mtd: rawnand: denali: convert to nand_scan()
mtd: rawnand: fsl_elbc: convert driver to nand_scan()
mtd: rawnand: fsl_ifc: convert driver to nand_scan()
mtd: rawnand: fsmc: convert driver to nand_scan()
mtd: rawnand: gpmi: convert driver to nand_scan()
mtd: rawnand: hisi504: convert driver to nand_scan()
mtd: rawnand: jz4780: convert driver to nand_scan()
mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan()
mtd: rawnand: lpc32xx_slc: convert driver to nand_scan()
mtd: rawnand: marvell: convert driver to nand_scan()
mtd: rawnand: mtk: convert driver to nand_scan()
mtd: rawnand: mxc: convert driver to nand_scan()
mtd: rawnand: nandsim: convert driver to nand_scan()
mtd: rawnand: omap2: convert driver to nand_scan()
mtd: rawnand: s3c2410: convert driver to nand_scan()
mtd: rawnand: sh_flctl: move all NAND chip related setup in one
function
mtd: rawnand: sh_flctl: convert driver to nand_scan()
mtd: rawnand: sunxi: convert driver to nand_scan()
mtd: rawnand: tango: convert driver to nand_scan()
mtd: rawnand: txx9ndfmc: rename nand controller internal structure
mtd: rawnand: txx9ndfmc: convert driver to nand_scan()
mtd: rawnand: vf610: convert driver to nand_scan()
mtd: rawnand: atmel: convert driver to nand_scan()
mtd: rawnand: sm_common: convert driver to nand_scan_with_ids()
mtd: rawnand: docg4: convert driver to nand_scan()
mtd: rawnand: qcom: convert driver to nand_scan()
mtd: rawnand: jz4740: convert driver to nand_scan()
mtd: rawnand: tegra: convert driver to nand_scan()
mtd: rawnand: do not export nand_scan_[ident|tail]() anymore
mtd: rawnand: allocate dynamically ONFI parameters during detection

drivers/mtd/nand/raw/atmel/nand-controller.c | 83 ++---
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 47 ++-
drivers/mtd/nand/raw/cafe_nand.c | 130 ++++---
drivers/mtd/nand/raw/davinci_nand.c | 195 +++++-----
drivers/mtd/nand/raw/denali.c | 138 +++----
drivers/mtd/nand/raw/docg4.c | 55 +--
drivers/mtd/nand/raw/fsl_elbc_nand.c | 19 +-
drivers/mtd/nand/raw/fsl_ifc_nand.c | 19 +-
drivers/mtd/nand/raw/fsmc_nand.c | 148 ++++----
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 56 +--
drivers/mtd/nand/raw/hisi504_nand.c | 78 ++--
drivers/mtd/nand/raw/jz4740_nand.c | 46 ++-
drivers/mtd/nand/raw/jz4780_nand.c | 34 +-
drivers/mtd/nand/raw/lpc32xx_mlc.c | 109 +++---
drivers/mtd/nand/raw/lpc32xx_slc.c | 77 ++--
drivers/mtd/nand/raw/marvell_nand.c | 206 ++++++-----
drivers/mtd/nand/raw/mtk_nand.c | 75 ++--
drivers/mtd/nand/raw/mxc_nand.c | 136 +++----
drivers/mtd/nand/raw/nand_base.c | 121 +++++--
drivers/mtd/nand/raw/nand_micron.c | 6 +-
drivers/mtd/nand/raw/nand_timings.c | 12 +-
drivers/mtd/nand/raw/nandsim.c | 82 +++--
drivers/mtd/nand/raw/omap2.c | 521 +++++++++++++--------------
drivers/mtd/nand/raw/qcom_nandc.c | 71 ++--
drivers/mtd/nand/raw/s3c2410.c | 30 +-
drivers/mtd/nand/raw/sh_flctl.c | 57 ++-
drivers/mtd/nand/raw/sm_common.c | 39 +-
drivers/mtd/nand/raw/sunxi_nand.c | 43 +--
drivers/mtd/nand/raw/tango_nand.c | 40 +-
drivers/mtd/nand/raw/tegra_nand.c | 162 +++++----
drivers/mtd/nand/raw/txx9ndfmc.c | 35 +-
drivers/mtd/nand/raw/vf610_nfc.c | 127 +++----
include/linux/mtd/rawnand.h | 17 +-
include/linux/mtd/sh_flctl.h | 1 +
34 files changed, 1603 insertions(+), 1412 deletions(-)

--
2.14.1

\
 
 \ /
  Last update: 2018-07-20 01:01    [W:0.736 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site