lkml.org 
[lkml]   [2018]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/4] ARM: at91: pm: configure wakeup sources for ULP1 mode
Hi,

On 17/07/2018 11:26:57+0300, Claudiu Beznea wrote:
> Since for ULP1 PM mode of SAMA5D2 the wakeup sources are limited and
> well known add a method to check if these wakeup sources are defined by
> user (either via DT or filesystem). In case there are no wakeup sources
> defined for ULP1 the PM suspend will fail, otherwise these will be
> configured in fast startup registers of PMC. Since wakeup sources of
> ULP1 need also to be configured in SHDWC registers the code was a bit
> changed to map the SHDWC also in case ULP1 is requested by user (this
> was done in the initialization phase). In case the ULP1 initialization
> fails the ULP0 mode is used (this mode was also used in case backup mode
> initialization failed).
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
> arch/arm/mach-at91/pm.c | 165 +++++++++++++++++++++++++++++++++++++++++-------
> 1 file changed, 143 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index 099d8094018c..c8ef696b83b6 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -80,6 +80,87 @@ static struct at91_pm_bu {
> phys_addr_t resume;
> } *pm_bu;
>
> +struct wakeup_source_info {
> + unsigned int pmc_fsmr_bit;
> + unsigned int shdwc_mr_bit;
> + bool set_polarity;
> +};
> +
> +static const struct wakeup_source_info ws_info[] = {
> + { .pmc_fsmr_bit = AT91_PMC_FSTT(10), .set_polarity = true },
> + { .pmc_fsmr_bit = AT91_PMC_RTCAL, .shdwc_mr_bit = BIT(17) },
> + { .pmc_fsmr_bit = AT91_PMC_USBAL },
> + { .pmc_fsmr_bit = AT91_PMC_SDMMC_CD },
> +};
> +
> +static const struct of_device_id sama5d2_ws_ids[] = {
> + { .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] },
> + { .compatible = "atmel,at91rm9200-rtc", .data = &ws_info[1] },
> + { .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] },
> + { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
> + { .compatible = "usb-ohci", .data = &ws_info[2] },
> + { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
> + { .compatible = "usb-ehci", .data = &ws_info[2] },
> + { .compatible = "atmel,sama5d2-sdhci", .data = &ws_info[3] },
> + { /* sentinel */ }
> +};
> +
> +static int at91_pm_config_ws(unsigned int pm_mode, bool set)
> +{
> + const struct wakeup_source_info *wsi;
> + const struct of_device_id *match;
> + struct platform_device *pdev;
> + struct device_node *np;
> + unsigned int mode = 0, polarity = 0, val = 0;
> +
> + if (pm_mode != AT91_PM_ULP1)
> + return 0;
> +
> + if (!pm_data.pmc || !pm_data.shdwc)
> + return -EPERM;
> +
> + if (!set) {
> + writel(mode, pm_data.pmc + AT91_PMC_FSMR);
> + return 0;
> + }
> +
> + /* SHDWC.WUIR */
> + val = readl(pm_data.shdwc + 0x0c);
> + mode |= (val & 0x3ff);
> + polarity |= ((val >> 16) & 0x3ff);
> +
> + /* SHDWC.MR */
> + val = readl(pm_data.shdwc + 0x04);
> +
> + /* Loop through defined wakeup sources. */
> + for_each_matching_node_and_match(np, sama5d2_ws_ids, &match) {
> + pdev = of_find_device_by_node(np);

of_find_device_by_node takes a reference to the embedded struct
device...

> + if (!pdev)
> + continue;
> +
> + if (device_may_wakeup(&pdev->dev)) {
> + wsi = match->data;
> +
> + /* Check if enabled on SHDWC. */
> + if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit))
> + continue;
> +
> + mode |= wsi->pmc_fsmr_bit;
> + if (wsi->set_polarity)
> + polarity |= wsi->pmc_fsmr_bit;
> + }

So you need to drop it here.

Can you do that and resend, just that patch? thanks.

> + }
> +
> + if (mode) {
> + writel(mode, pm_data.pmc + AT91_PMC_FSMR);
> + writel(polarity, pm_data.pmc + AT91_PMC_FSPR);
> + } else {
> + pr_err("AT91: PM: no ULP1 wakeup sources found!");
> + }
> +
> + return mode ? 0 : -EPERM;
> +}
> +
> /*
> * Called after processes are frozen, but before we shutdown devices.
> */
> @@ -98,7 +179,7 @@ static int at91_pm_begin(suspend_state_t state)
> pm_data.mode = -1;
> }
>
> - return 0;
> + return at91_pm_config_ws(pm_data.mode, true);
> }
>
> /*
> @@ -234,6 +315,7 @@ static int at91_pm_enter(suspend_state_t state)
> */
> static void at91_pm_end(void)
> {
> + at91_pm_config_ws(pm_data.mode, false);
> }
>
>
> @@ -479,31 +561,28 @@ static void __init at91_pm_sram_init(void)
> &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
> }
>
> -static void __init at91_pm_backup_init(void)
> +static bool __init at91_is_pm_mode_active(int pm_mode)
> +{
> + return (pm_data.standby_mode == pm_mode ||
> + pm_data.suspend_mode == pm_mode);
> +}
> +
> +static int __init at91_pm_backup_init(void)
> {
> struct gen_pool *sram_pool;
> struct device_node *np;
> struct platform_device *pdev = NULL;
> + int ret = -ENODEV;
>
> - if ((pm_data.standby_mode != AT91_PM_BACKUP) &&
> - (pm_data.suspend_mode != AT91_PM_BACKUP))
> - return;
> + if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
> + return 0;
>
> pm_bu = NULL;
>
> - np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-shdwc");
> - if (!np) {
> - pr_warn("%s: failed to find shdwc!\n", __func__);
> - return;
> - }
> -
> - pm_data.shdwc = of_iomap(np, 0);
> - of_node_put(np);
> -
> np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
> if (!np) {
> pr_warn("%s: failed to find sfrbu!\n", __func__);
> - goto sfrbu_fail;
> + return ret;
> }
>
> pm_data.sfrbu = of_iomap(np, 0);
> @@ -530,6 +609,7 @@ static void __init at91_pm_backup_init(void)
> pm_bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
> if (!pm_bu) {
> pr_warn("%s: unable to alloc securam!\n", __func__);
> + ret = -ENOMEM;
> goto securam_fail;
> }
>
> @@ -537,21 +617,62 @@ static void __init at91_pm_backup_init(void)
> pm_bu->canary = __pa_symbol(&canary);
> pm_bu->resume = __pa_symbol(cpu_resume);
>
> - return;
> + return 0;
>
> -sfrbu_fail:
> - iounmap(pm_data.shdwc);
> - pm_data.shdwc = NULL;
> securam_fail:
> iounmap(pm_data.sfrbu);
> pm_data.sfrbu = NULL;
> + return ret;
> +}
>
> - if (pm_data.standby_mode == AT91_PM_BACKUP)
> +static void __init at91_pm_use_default_mode(int pm_mode)
> +{
> + if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP)
> + return;
> +
> + if (pm_data.standby_mode == pm_mode)
> pm_data.standby_mode = AT91_PM_ULP0;
> - if (pm_data.suspend_mode == AT91_PM_BACKUP)
> + if (pm_data.suspend_mode == pm_mode)
> pm_data.suspend_mode = AT91_PM_ULP0;
> }
>
> +static void __init at91_pm_modes_init(void)
> +{
> + struct device_node *np;
> + int ret;
> +
> + if (!at91_is_pm_mode_active(AT91_PM_BACKUP) &&
> + !at91_is_pm_mode_active(AT91_PM_ULP1))
> + return;
> +
> + np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-shdwc");
> + if (!np) {
> + pr_warn("%s: failed to find shdwc!\n", __func__);
> + goto ulp1_default;
> + }
> +
> + pm_data.shdwc = of_iomap(np, 0);
> + of_node_put(np);
> +
> + ret = at91_pm_backup_init();
> + if (ret) {
> + if (!at91_is_pm_mode_active(AT91_PM_ULP1))
> + goto unmap;
> + else
> + goto backup_default;
> + }
> +
> + return;
> +
> +unmap:
> + iounmap(pm_data.shdwc);
> + pm_data.shdwc = NULL;
> +ulp1_default:
> + at91_pm_use_default_mode(AT91_PM_ULP1);
> +backup_default:
> + at91_pm_use_default_mode(AT91_PM_BACKUP);
> +}
> +
> struct pmc_info {
> unsigned long uhp_udp_mask;
> };
> @@ -645,7 +766,7 @@ void __init sama5d2_pm_init(void)
> if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
> return;
>
> - at91_pm_backup_init();
> + at91_pm_modes_init();
> sama5_pm_init();
> }
>
> --
> 2.7.4
>

--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2018-07-17 12:46    [W:0.505 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site