Messages in this thread | | | From | Jerome Brunet <> | Subject | [PATCH 0/3] clk: meson: clk-pll driver update | Date | Tue, 17 Jul 2018 11:56:14 +0200 |
| |
This patchset is yet another round of update to the amlogic pll driver.
1) Enable bit is added so we don't rely on the bootloader or the init value to enable to pll device. 2) OD post dividers are removed from the pll driver. This simplify the driver and let us provide the clocks which exist between those dividera. Some device are actually using these clocks. 3) The rates hard coded in parameter tables are remove. Instead, we only rely on the parent rate and the parameters to calculate the output rate, which is a lot better.
This series has been tested on the gxl libretech cc and axg s400. I did not test it on meson8b yet.
Jerome Brunet (3): clk: meson: clk-pll: add enable bit clk: meson: clk-pll: remove od parameters clk: meson: clk-pll: drop hard-coded rates from pll tables
drivers/clk/meson/axg.c | 320 ++++++++++++++++------------ drivers/clk/meson/axg.h | 8 +- drivers/clk/meson/clk-pll.c | 156 +++++++++----- drivers/clk/meson/clkc.h | 16 +- drivers/clk/meson/gxbb.c | 504 ++++++++++++++++++++++---------------------- drivers/clk/meson/gxbb.h | 10 +- drivers/clk/meson/meson8b.c | 167 ++++++++------- drivers/clk/meson/meson8b.h | 5 +- 8 files changed, 648 insertions(+), 538 deletions(-)
-- 2.14.4
| |