lkml.org 
[lkml]   [2018]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 5/7] thermal: tsens: Add generic support for TSENS v2 IP
On Thu, Jul 12, 2018 at 12:10 AM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Mon, Jul 9, 2018 at 4:43 AM, Amit Kucheria <amit.kucheria@linaro.org> wrote:
> > SDM845 uses v2 of the TSENS IP block but the get_temp() function
> > appears to be identical across v2.x.y in code seen so far. We use the
> > generic get_temp() function defined as part of ops_generic_v2.
> >
> > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> > ---
> > drivers/thermal/qcom/tsens-v2.c | 6 +++++-
> > drivers/thermal/qcom/tsens.c | 3 +++
> > drivers/thermal/qcom/tsens.h | 5 ++++-
> > 3 files changed, 12 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
> > index 34ba6c7..f40150f 100644
> > --- a/drivers/thermal/qcom/tsens-v2.c
> > +++ b/drivers/thermal/qcom/tsens-v2.c
> > @@ -69,8 +69,12 @@ static const struct tsens_ops ops_generic_v2 = {
> > .get_temp = get_temp_tsens_v2,
> > };
> >
> > +const struct tsens_data data_tsens_v2 = {
> > + .ops = &ops_generic_v2,
> > +};
> > +
> > +/* Kept around for backward compatibility with old msm8996.dtsi */
> > const struct tsens_data data_8996 = {
> > .num_sensors = 13,
> > .ops = &ops_generic_v2,
> > };
>
> Something seems fishy here. You have a ".num_sensors" for sdm8996
> hardcoded to 13 but you don't have a ".num_sensors" for your new v2.
> Where does num_sensors get set for everyone else? In patch #3 you
> have a new "#qcom,sensors" but:
>
> 1. Nothing reads this as far as I can tell, so that means everyone
> will end up with 0 sensors.
>
> 2. On your 2nd block of sensors in the sdm8996 device tree (see
> earlier patch in the series) you try to set qcom,sensors to 8. ...but
> since you still have a compatible of "qcom,msm8996-tsens" you'll get
> 13. That seems wrong. ...or did I miss something?

Refer to commit 6d7c70d1cd6 (thermal: qcom: tsens: Allow number of
sensors to come from DT) merged earlier. #qcom,sensors will override
the platform data if defined.
\
 
 \ /
  Last update: 2018-07-15 22:05    [W:0.054 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site